Sealey APIBP2100 User Manual download pdf

INSTRUCTIONS FOR:

INDUSTRIAL STEEL WORKBENCHES

MODEL Nos: API1500, API800, AP2100

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained,

give you years of trouble free performance.

1. SAFETY INSTRUCTIONS

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.

USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE

DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1.1 GENERAL SAFETY

 WARNING! Ensure Health & Safety, local authority, and

general workshop practice regulations are adhered to when

using this workbench.

 WARNING! Use workbench on level and solid ground, preferably

concrete. Avoid tarmacadam since the workbench may sink into

the surface.

 Locate workbench in a suitable working area.

 Keep the work area clean, uncluttered and ensure there is

adequate lighting.

 Keep the workbench clean and tidy in accordance with good

workshop practice.

 Keep children and unauthorised persons away from the

working area.

 DO NOT use the workbench for any purpose other than that for

which it is designed.

 DO NOT undertake work on the workbench without the

workpiece being adequately secured. Use clamps or a vice (not

included) to secure the workpiece. Available from your Sealey

dealer.

 DO NOT use the workbench out of doors.

 DO NOT get the workbench wet or use in damp or wet

locations or areas where there is condensation.

 DO NOT clean the workbench with any solvents which may

damage the work surface or the painted surfaces.

Note! The assembly of this product will require assistance.

2.1 INTRODUCTION: Manufactured from heavy gauge steel,

these benches are the top end of our range with a weight

capacity of 1000kg (evenly distributed). Fitted with adjustable

feet to ensure work surface is level even if your floor is not.

40mm thick laminate worktop is edged with double thick trim.

Optional single or two drawer unit, vice support or back

panels easily attach converting the workbench into a

workstation.

2.2 SPECIFICATION:

Model No: ................ Width .... Depth...Height

API1500 .................. 1500 ...... 750 .......850mm

API1800.................... 1800 ...... 750 .......850mm

API2100.................... 2100 ...... 750 .......850mm

3.1 See fig.2. Join the two leg frames (2) together using one of

the upper beams (3) and four short screws (5). Ensure that

the open sections on all components are facing inwards. Fix

the second upper beam (3) in place using four short screws

(5). Align the fixing holes in the lower beam with the holes in

the two leg frames and fix in place using four short screws (5).

3.2 See fig.3. Lay the bench top (1) face down on a smooth

clean surface. Invert the assembled frame and place it

centrally onto the bench top. Align the holes in the upper

beams with the holes in the underside of the bench top and

fix the frame onto the bench top using six short screws (5).

3.3 Turn the assembled bench

onto its feet as shown in fig.4.

3.4 Site the bench in the

workplace observing the

advice given in section 1.

3.5 Adjust the feet to compensate

for uneven surfaces and lock

each foot using the locking

nut shown in the adjacent

diagram.

2. INTRODUCTION AND SPECIFICATIONS

3. WORKBENCH ASSEMBLY

Original Language Version

API1500, API1800, API2100 Issue No.1 20/05/10

fig.1

fig.2

1 2 3 4

Summary of Contents

Page 1 - API1500, API800, AP2100

INSTRUCTIONS FOR:INDUSTRIAL STEEL WORKBENCHESMODEL Nos: API1500, API800, AP2100Thank you for purchasing a Sealey product. Manufactured to a high stand

Page 2

3.1 See fig.5. Back panel kits are available for all three sizes of bench and are an optional extra to be purchased separately. APIBP1500 ...

Page 3 - Original Language Version

API1500, API1800, API2100 Issue No.1 20/05/10Original Language Version5.3 The main clamp is attached to a tube which is a sliding fit insid

Page 4 - 01284 703534

API1500, API1800, API2100 Issue No.1 20/05/10Original Language VersionSee our website for full details and specification for these drawer units

Comments to this Manuals

No comments

Sealey APIBP2100 User Manual

Browse online or download User Manual for Equipment Sealey APIBP2100. Sealey APIBP2100 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Sealey APIBP2100