Sealey APIBP2100 User Manual download pdf (Page 3)

API1500, API1800, API2100 Issue No.1 20/05/10

Original Language Version

5.3 The main clamp is attached to a tube which is a sliding fit

inside the main mounting tube. Withdraw the clamp from the

mounting tube and fix the mounting tube to the two bars 'V',

under the work top using four short bolts as shown in fig.10

5.4 Insert the clamp tube into the mounting tube as shown in

fig.11-Y and rotate the clamp so that it is uppermost. Push the

clamp tube into the mounting tube until the clamp comes up

against the edge of the bench and laps over the top of it as

shown in fig.12.

5.5 Loosen and remove the four bolts on the front of the clamp

and lift the top plate away. Bolt the chosen vice to the top plate

ensuring that the fixings are within the depth of the plate.

Place the vice and plate back onto the top of the bench over

the lower part of the clamp and bolt the two parts back

together again. Tighten the clamping knob on the underside of

the clamp assembly. See fig.11-Z.

5.6 To stow the vice under the bench loosen the clamping knob

on the underside of the clamp assembly. See fig.11-Z. Keeping

a firm hold on the assembly pull the vice and top plate

forwards until they are clear of the bench edge. Allow the

assembly to slowly rotate through 180º until it is hanging

downwards. Push the assembly under the front edge of the

bench until it is in the orientation shown in fig.8.

6.1 Drawer units can be purchased as an optional extra. Single

and double drawer units can be suspended from the underside

of the bench using two draw support bars as shown in fig.13.

Larger drawer units will be free standing under the bench. See

overleaf for other drawer options.

6. DRAWER OPTIONS

fig.14

fig.9

fig.10

fig.11

fig.12

fig.13

API8 Single draw unit (bench mounted).

1 2 3 4

No comments

Sealey APIBP2100 User Manual Page 3