Sealey WPF1 User Manual Page 1

Browse online or download User Manual for Pumps Sealey WPF1. Sealey WPF1 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
INSTRUCTIONS FOR:
INLET FILTER FOR SURFACE MOUNTING PUMPS
1LTR/2LTR
MODEL N
OS: WPF1/WPF2
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sales@sealey.co.uk
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
email
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS
& CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO
DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP
INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
 Ensurethe filterassembly sight glass bowl and pipe fittings are securely seated.
For filtering “clean” or brackish water including fresh water mixed with sea water.
 Be aware of the pump efficiency during operation to warn of filter cleaning requirement.
 Stop the pump before attempting filter cleaning.
 DO NOT use for solvents, oils, fuels, chemicals or dangerously polluted water.
 DO NOT use the filter for any purpose other than for which it is designed.
2. INTRODUCTION
Top quality filter with a composite case. Includes a screw top lid to reveal the easy clean filter element. Ideal for fitting to Sealey
and other brands of surface mounting pumps. Available in 1ltr (1 tier filter) and 2ltr (2 tier filter) capacities.
Environmental Protection
. Recycle unwanted packaging materials or dispose of in a manner which is compatible
with the environment. When the product is no longer required, dispose of in an environmentally protective way.
Original Language Version
WPF1/WPF2 Issue: 1 - 19/12/13
© Jack Sealey Limited
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
4. INSTALLATION/MAINTENANCE
4.1 The filter is supplied assembled and ready for immediate use. To familiarise yourself with all the components, it is
best to disassemble and reassemble at this point.
4.1.1 Unscrew the sight glass bowl and remove the filter element. The element gauze is delicate and special care is
required when cleaning. Flush or soft brush clean with water. DO NOT probe.
4.1.2 The filter base with the “o” ring, snaps on and off the filter cylinder element for cleaning.
4.1.3 If required there are 4 mounting holes ø4 x 12 deep in the top manifold. These could be tapped M5 x 8mm deep for
machine screw mounting or fixed on assembly to a bracket with 4 self tapping screws No 10 x 12mm long.
4.1.4 Fit the top manifold to a bespoke mounting bracket (not supplied) by preferred method.
4.1.5 Check the small “o” ring is fitted and place the assembled filter element inside the sight glass bowl onto the central
register boss.
4.1.6 Check the large “o” ring is fitted and screw the sight glass bowl on to the top manifold hand tight.
1/8” BSP Bleed Plug
WFP1
WFP2
OUT
OUT
3. SPECIFICATIONS
Model No: WPF1 WPF2
Capacity: 1ltr 2ltr
Suitability: WPB050; WPS060 WPB050; WPS060; WPS062S; WPB062S
Inlet/Outlet: 1”BSP 1”BSP
Maximum Pressure: 0.4Mpa (58psi) 0.4Mpa (58psi)
Page view 0
1

Summary of Contents

Page 1 - WPF1/WPF2

INSTRUCTIONS FOR:INLET FILTER FOR SURFACE MOUNTING PUMPS 1LTR/2LTRMODEL NOS: WPF1/WPF2 NOTE: It is our policy to continually improve products and as

Related models: WPF2

Comments to this Manuals

No comments