Sealey WL12W User Manual download pdf

1.1. ELECTRICAL SAFETY

 WARNING! It is the responsibility of the owner and the operator to read, understand and comply with the following: You must check all

electrical products, before use, to ensure that they are safe. You must inspect power cables, plugs, sockets and any other connectors

for wear or damage.

1.1.1. Ensure that cables are always protected against short circuit and overload.

1.1.2. Regularly inspect power supply cables check all connections to ensure that none are loose.

1.1.3. Important: Ensure that the voltage marked on the appliance matches the power supply to be used and that the circuit is fitted with the

correct fuse. If in doubt, consult a qualified technician to connect the spotlight to a fused and switched DC supply.

1.1.4. DO NOT pull or carry the spotlight by the power cable.

1.1.5. DO NOT use worn or damaged cables, plugs or connectors. Immediately have any faulty item repaired or replaced by a qualified

technician.

Environmental Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.

When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)

into approved containers and dispose of the product and the fluids according to local regulations.

WEEE Regulations

Dispose of this product at the end of its working life in compliance with the EU Directive on

Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed

of in an environmentally protective way. Contact your local solid waste authority for recycling information.

INSTRUCTIONS FOR:

LED WORK SPOTLIGHT 12W/48W

MODEL NO: WL12W, WL48W

1. SAFETY

3. SPECIFICATION

2. INTRODUCTION

WL12W, WL48W Issue: 1 - 08/07/14

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Original Language Version

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE

PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

Model No: ...................WL12W

Power:. ........................ 12W

Lumen Output:.................. 840lm

Supply:.....................9-32V DC

Dimension: . . . . . . . . . . . . . . . . . . . Ø80mm

Model No: WL12W

Spotlight with 4 x 3W Epistar™ high power LEDs producing up to 840 lumens output. IP67 Rated with a powder coated die cast aluminium

housing. Suitable replacement for traditional halogen work lights with up to 80% less power consumption. Supplied with grade 304 stainless

steel mounting bracket and xings.

Model No: WL48W

Spotlight with 16 x 3W Epistar™ high power LEDs producing up to 3450 lumens output. IP67 Rated with a powder coated die cast aluminium

housing. Suitable replacement for traditional halogen work lights with up to 12% less power consumption. Supplied with grade 304 stainless

steel mounting bracket and xings.

Model No: ...................WL48W

Power:. ........................ 48W

Lumen Output:................. 3450lm

Supply:.....................9-32V DC

Dimensions: ............. 125 x 110mm

WL12W

WL48W

M10

Summary of Contents

Page 1 - WL12W, WL48W

1.1. ELECTRICAL SAFETY WARNING! It is the responsibility of the owner and the operator to read, understand and comply with the following: You mus

Related models: WL48W

Comments to this Manuals

No comments

Sealey WL12W User Manual

Browse online or download User Manual for Lighting Sealey WL12W. Sealey WL12W User Manual

Summary of Contents

Related models: WL48W

Comments to this Manuals

Related products and manuals for Lighting Sealey WL12W