Sealey WL18W User Manual download pdf

1.1. ELECTRICAL SAFETY

 WARNING! It is the responsibility of the owner and the operator to read, understand and comply with the following: You must check all

electrical products, before use, to ensure that they are safe. You must inspect power cables, plugs, sockets and any other connectors

for wear or damage.

1.1.1. Ensure that cables are always protected against short circuit and overload.

1.1.2. Regularly inspect power supply cables check all connections to ensure that none are loose.

1.1.3. Important: Ensure that the voltage marked on the appliance matches the power supply to be used and that the circuit is fitted with the

correct fuse. If in doubt, consult a qualified technician to connect the floodlight to a fused and switched DC supply.

1.1.4. DO NOT pull or carry the floodlight by the power cable.

1.1.5. DO NOT use worn or damaged cables, plugs or connectors. Immediately have any faulty item repaired or replaced by a qualified

technician.

Environmental Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.

When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)

into approved containers and dispose of the product and the fluids according to local regulations.

WEEE Regulations

Dispose of this product at the end of its working life in compliance with the EU Directive on

Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed

of in an environmentally protective way. Contact your local solid waste authority for recycling information.

INSTRUCTIONS FOR:

LED WORK FLOODLIGHT 18W/24W

MODEL NO: WL18W, WL24W

1. SAFETY

3. SPECIFICATION

2. INTRODUCTION

WL18W, WL24W Issue: 1 - 08/07/14

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Original Language Version

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE

PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

Model No: ...................WL18W

Power:. ........................ 18W

Lumen Output:................. 1080lm

Supply:.....................9-32V DC

Dimension: . . . . . . . . . . . . . . . . . . Ø116mm

Model No: WL18W

Floodlight with 6 x 3W Epistar™ high power LEDs producing up to 1080 lumens output. IP67 Rated with a powder coated die cast aluminium

housing. Suitable replacement for traditional halogen work lights with up to 65% less power consumption. Supplied with grade 304 stainless

steel mounting bracket and xings.

Model No: WL24W

Floodlight with 8 x 3W Epistar™ high power LEDs producing up to 1440 lumens output. IP67 Rated with a powder coated die cast aluminium

housing. Suitable replacement for traditional halogen work lights with up to 57% less power consumption. Supplied with grade 304 stainless

steel mounting bracket and xings.

Model No: ...................WL24W

Power:. ........................ 24W

Lumen Output:................. 1440lm

Supply:.....................9-32V DC

Dimensions: .............142 x 122mm

WL18W

WL24W

M10

Summary of Contents

Page 1 - WL18W, WL24W

1.1. ELECTRICAL SAFETY WARNING! It is the responsibility of the owner and the operator to read, understand and comply with the following: You mus

Related models: WL24W

Comments to this Manuals

No comments

Sealey WL18W User Manual

Browse online or download User Manual for Lighting Sealey WL18W. Sealey WL18W User Manual

Summary of Contents

Related models: WL24W

Comments to this Manuals

Related products and manuals for Lighting Sealey WL18W