Sealey RB320E User Manual download pdf

1. SAFETY INSTRUCTIONS

2. INTRODUCTION & SPECIFICATIONS

3. PARTS AND ASSEMBLY



Unpack products and check contents against the list below. Should there be any damaged or missing parts contact your

supplier immediately. Some actions described in 3.2-3.4 may not be required if already assembled.

 DO NOT use the roof box if any parts are missing or damaged as this may cause failure or possible personal injury.

 WARNING! Due to the variety in design of vehicles, it is the users full responsibility to ensure no damage occurs whilst fitting. Correct

attachment of the roof box to a vehicle is critical and is beyond the control of the manufacturer, distributor, or supplier.

 WARNING!

The user must secure the roof box, checking the security frequently when in use.

 WARNING! Avoid any protrusions beyond the side of the car as these may present a risk of injury to passers-by.

 DO NOT use the roof box for any purpose other than for which it is designed.

 WARNING! Drive carefully, - Be aware of cross winds, sudden braking or hard cornering, reduce speed accordingly when using roof

box.

Recommended maximum speed is 130km/h.

 WARNING! This roof box is designed for temporary use only, remove when not in use and before going through a car wash.

 Before every use check the roof box for security of fittings or any sign of wear and tear. Replace any worn or damaged parts.

 Check the load is stable and uniformly distributed before transit. Use the supplied luggage straps.

 Be cautious of the load height and restrictions due to car park height barriers you may encounter.

 WARNING! Be wary of parts of the roofbox protruding from the boundaries of the vehicle, especially the tailgate sweep.

 WARNING! Be wary of gusts of wind when installing, two people recommended.

 DO NOT exceed the weight limit stated in the roof box specifications.

 WARNING! Remember the driver of the vehicle is responsible for the security and safety of the load carried.

 WARNING! Warnings and cautions in this manual cannot cover all possible situations. It must be understood that common

sense and cautions are factors which cannot be built into this product, but must be applied by the user.

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and

properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS, AND

CAUTIONS. USE THIS PRODUCT CORRECTLY, AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO

MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.

The RB320E, RB420E & RB480E Roof boxes are manufactured from HIPS (High Impact Polystyrene) for strength, looks and durability. All

three models are finished in stylish gloss black and benefit from twin point central locking on RB320E & RB420E and triple point central

locking on RB480E. All are supplied with 70mm wide U-Bolts for fitting to most common size roof bars.

3.1. Unlock the cover safety lock (fig.1).

3.2. Align the hinge positions and place the cover (item 2) over the base (item 1) of the roofbox. Using the supplied key (item 3), lock the

cover to the base, turning the key anticlockwise (fig.2). Make a note of the key serial number.

3.3. Insert the hinge pivot pins (item 4) full depth (fig.3). Thumb pressure should be adequate.

3.4. Unlock the cover and open fully enabling fitting of the spring loaded latches (fig.4). Thumb pressure should be adequate to connect the

ball and socket pivot joint.

3.5. To close the cover, apply equal pressure with hands near to opposite ends.

INSTRUCTIONS FOR:

ROOF BOX GLOSS BLACK 320/420/480ltr 50KG

MAX LOAD

MODEL No's: RB320E / RB420E / RB480E

Model No:........................................ RB320E............................................ RB420E............................................RB480E

Capacity:.......................................... 320ltr.................................................420ltr................................................ 480ltr

Max Load (uniformly distributed)......50kg..................................................50kg.................................................50kg

Dimensions (L x W x H)................... 1320 x 780 x 360mm........................1450 x 940 x 400mm....................... 1980 x 780 x 400mm

Item Description Qty

1 Roofbox base 1

2 Roofbox cover 1

3 Keys 2

4 Hinge pivot pin 2 (x3-RB480E)

5 Clamp plate (2 hole) 4

6 "U" bolt 4

7 Clamp knobs 8

8 Luggage straps 2

9 Self adhesive patches 8

g.1

g.2

Item 4

Safety lock released

g.3

g.4

Thumb

pressure

Original Language Version

RB320E,RB420E,RB480E ISSUE 1 09/01/14

Jack Sealey Limited

Item 2

Item 1

On the cover

item 2.

5,6,7,8

1 2

Summary of Contents

Page 1 - MAX LOAD

1. SAFETY INSTRUCTIONS 2. INTRODUCTION & SPECIFICATIONS 3. PARTS AND ASSEMBLY Unpack products and check contents against the list below.

Page 2 - 6. MAINTENANCE

The following instructions assume the roof rails are already installed on the vehicle and the roof bars can be adjusted to suit the roof box. The roof

Related models: RB420E | RB480E |

Comments to this Manuals

No comments

Sealey RB320E User Manual

Browse online or download User Manual for Hardware Sealey RB320E. Sealey RB320E User Manual

Summary of Contents

Related models: RB420E | RB480E |

Comments to this Manuals

Related products and manuals for Hardware Sealey RB320E