Sealey S0455 User Manual download pdf

 Ensure all workshop safety rules, regulations and conditions are complied with when using the torque wrench.

 Maintain the wrench in good condition and replace any damaged or worn parts. Use genuine parts only. Unauthorised parts may be

dangerous and will invalidate the warranty.

 The wrench is a precision tool, DO NOT abuse it.

 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

 Keep children and unauthorised persons away from the working area.

 WARNING! DO NOT use the wrench if damaged or thought to be faulty (Contact Service Agent).

 DO NOT drop or throw the wrench.

 DO NOT use wrench unless you have been instructed in its use by a qualified person.

 DO NOT use any cleaner which might affect the high pressure grease with which the wrench it is packed.

 After use adjust to lowest torque setting (but not below),clean and store in a safe, dry, childproof location.

Model No: ................................S0455 ....................................S0456

Torque Range (ft.lb/N.m) .....................20-80/27-108 .........................20-150/27-204

Drive (“sq.) ................................3/8 ..........................................1/2

Length (mm) ...............................275......................................... 465

1. SAFETY

2. SPECIFICATIONS

3.1. Hold torque wrench in left hand (if right handed) so that required scale - foot.pounds or Newton.metres - is uppermost and visible.

3.2. Turn knurled lock screw at end of handle anticlockwise to unlock knurled adjusting grip.

3.3. Turn adjusting grip to select torque setting as follows, for a required setting of 56ft.lb:

• Turngripuntiltopedgeofgripislevelwiththe50ft.lblineonthehandlescaleandthezerograduationonthegripisalignedwiththe

centre line of the handle scale.

• Rotatehandlefurther,clockwise,until‘6th’graduationongripisalignedwithcentrelinetogiveasettingof50+6=56ft.lb.

NOTE: Ifusingthe‘N.m’scaletheneachdivisiononthegripgraduationisequivalentto1.36N.m.

Therefore to set wrench at 76N.m:

• Turngripuntiltopedgeofgripislevelwiththe67.8N.mlineonthehandlescaleandthezerograduationonthegripisalignedwiththe

centre line of the handle scale.

• Rotatethehandlefurther,clockwise,untilthe‘6th’graduationonthegripisalignedwiththecentrelinetogiveasettingof67.8 

 +(6x1.36)=67.8+8.2=76N.m.

3.4. Tighten lock screw at end of handle to prevent accidental alteration of the setting.

3.5. When tightening the nut/bolt you will feel and hear the wrench mechanism click when the set torque is reached.

 Immediatelystopapplyingforcetowrenchtoavoidovertighteningnut/bolt.Wrenchwillresetreadyfornextapplication.

NOTE: If the wrench has not been used for some time, operate it a few times, at a low setting, to ensure all internal parts are coated in

grease.

3. OPERATION

4. RECALIBRATION

INSTRUCTIONS FOR

TORQUE WRENCHES

MODELNo’s:S0455, S0456

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE

PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL

INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

S0455, S0456 Issue: 3(L) - 22/09/14

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Original Language Version

4.1. Calibration check

Werecommendtoensurecontinuedaccuracythecalibrationofeachwrenchshouldbecheckedannually,beginningoneyearafterrst

use. Calibration should also be checked after any impact, over-torquing or other misuse. Contact your Sealey Dealer to arrange

recalibration.

S0455, S0456 1

Summary of Contents

Page 1 - S0455, S0456

 Ensure all workshop safety rules, regulations and conditions are complied with when using the torque wrench. Maintain the wrench in good conditio

Related models: S0456

Comments to this Manuals

No comments

Sealey S0455 User Manual

Browse online or download User Manual for Tools Sealey S0455. Sealey S0455 User Manual

Summary of Contents

Related models: S0456

Comments to this Manuals

Related products and manuals for Tools Sealey S0455