Sealey VS726 User Manual download pdf

INSTRUCTIONS FOR:

Bush Removal Tool -

HONDA CR-V

Model No: VS726

1. SAFETY INSTRUCTIONS

2. APPLICATIONS / PARTS

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give

you years of trouble free performance.

IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.

USE THE TOOL CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE

AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

 WARNING! Ensure Health and Safety, local authority and general

workshop practice regulations are adhered to when using tools.

 DO NOT use tools if damaged.

 Ensure that a vehicle which has been jacked up is adequately

supported with axle stands and that the wheels are chocked,

refer to the vehicle manufacturer’s service instructions, or a

proprietary manual.

 Wear approved eye protection. A full range of personal safety

equipment is available from your Sealey dealer.

 Wear suitable clothing to avoid snagging. Do not wear jewellery

and tie back long hair.

 DO NOT use air tools to operate the force screw.

 Maintain tools in good and clean condition for best and safest

performance.

 When not in use, clean and lubricate tool, and store in its

storage case in a safe, dry, childproof location.

 IMPORTANT: The force screw must be kept well lubricated.

IMPORTANT: This manual is provided as a guide only, refer to

the vehicle manufacturer’s service instructions, or a proprietary

manual, to establish the current procedure and data.

 WARNING! Failure to heed safety and warning instructions may

result in damage and/or personal injury and will invalidate the

warranty.

 WARNING! The warnings, cautions and instructions

referred to in this manual cannot cover all possible

conditions and situations that may occur. It must be

understood that common sense and caution are factors

which cannot be built into this product, but must be

applied by the operator.

Suitable for the removal and installation of the rear trailing arm bush

without damaging the ABS sensor cable. Features a window for

reference while in operation.

Application:

HONDA: CR-V - K6 and K8 (09/1996 - 08/2002)•



ALWAYS KEEP FORCE

SCREW WELL

LUBRICATED.

DO NOT USE AIR TOOLS

Original Language Version

VS726 Issue: 1 - 28/10/10

No. Part No. Part name

1 VS726.01 Main Body

2 VS726.02 Bolt (x2)

3 VS726.03 Holding Hook (x2)

4 VS726.04 Pusher

5 VS726.05 Allen Bolt

6 VS726.06 Connecting Plate

7 VS726.07 Force Screw

8 VS726.08 Alignment Pin

9 VS726.09 Installation Ring

1 2

Summary of Contents

Page 1 - HONDA CR-V

INSTRUCTIONS FOR:Bush Removal Tool - HONDA CR-VModel No: VS726 1. SAFETY INSTRUCTIONS 2. APPLICATIONS / PARTSThank you for purchasing a Sealey prod

Page 2 - 3. OPERATION

3. OPERATIONCertain parts may need to be removed from the vehicle to allow access to the rear trailing arm. Refer to the vehicle manufacturer’s ser

Related models: SX0406 | SA28 | DFS55 | WS680 | WS650 | WS570 | SM14 | SA57 | SA56 | SA4 | SA602L | SA6001 | SA686 |

Comments to this Manuals

No comments

Sealey VS726 User Manual

Browse online or download User Manual for Tools Sealey VS726. Sealey VS726 User Manual

Summary of Contents

Related models: SX0406 | SA28 | DFS55 | WS680 | WS650 | WS570 | SM14 | SA57 | SA56 | SA4 | SA602L | SA6001 | SA686 |

Comments to this Manuals

Related products and manuals for Tools Sealey VS726