WARNING! Ensure Health and
Safety, local authority and general
workshop practice regulations are
adhered to when using tools.
DO NOT use tools if damaged.
Maintain tools in good and clean
condition for best and safest
performance.
Ensure that a vehicle which has
been jacked up is adequately
supported with axle stands.
Wear approved eye protection.
A full range of personal safety
equipment is available from your
Sealey dealer.
Wear suitable clothing to avoid
snagging.
DO NOT wear jewellery and tie
back long hair.
Account for all tools and parts
being used and do not leave any
in or near the engine.
1. SAFETY INSTRUCTIONS
2. INTRODUCTION & SPECIFICATION
3. INSTRUCTIONS
3.1. To repair a damaged drain plug thread first establish the thread size of the damaged plug then
choose a tap that is slightly larger than the existing thread.
3.2. Mount the tap in a suitable tap wrench and lightly oil it.
3.3 Introduce the tap into the damaged sump hole ensuring that it enters in line with the hole. Rotate the
tap until it begins to bite then advance it a half turn and back it off by a quarter turn.
3.4. As thread cutting proceeds periodically remove the tap and clean it to prevent a build up of metal
shavings being deposited in the sump.
3.5. Proceed until the tap is running freely in the hole then remove it.
3.6. Fit the appropriate sump plug and washer and tighten.
3.7. After the next use of the vehicle check that the plug and washer are oil tight.
INSTRUCTIONS FOR:
OIL DRAIN PLUG MASTER
THREAD REPAIR SET
MODEL No: VS661
2.1. Introduction. A comprehensive thread repair set ideal for repairing sump, gearbox and differential
drain plug threads. Used to tap the damaged thread slightly over size, then fit a new drain plug and
washer (supplied). Set is suitable for the most popular threads used on cars and light commercial
vehicles. Supplied in storage case.
2.2. Specification. Tap Sizes: M13 x 1.25
M13, M15, M17, M20, M22 x 1.50
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sales@sealey.co.uk
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version
VS661 Issue: 1 - 21/04/11
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS,
AND CAUTIONS. USE THIS PRODUCT CORRECTLY, AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO
DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these
instructions and properly maintained, give you years of trouble free performance.
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals