Sealey VS906 User Manual download pdf

 WARNING! Ensure Health & Safety, local authority, and

general workshop practice regulations are adhered to when

using this equipment.

 Familiarise yourself with the application and limitations of the

product, as well as potential hazards peculiar to the use of the

thermometer.

 Keep the thermometer clean for best and safest

performance.

 Store the thermometer in its protective cover when not in use.

 When not in use, store in a safe, dry, childproof area.

 DO NOT use equipment for any purpose other than that for

which it is designed.

 DO NOT allow untrained persons to operate the thermometer.

 DO NOT use the thermometer to test objects above 250ºC.

High precision digital thermometer with the sensor located in the

tip of the stainless probe. Compact and lightweight measuring

both °C and °F with hold function. Ideal for testing automotive air

conditioning output. Powered by 1.5Volt cell (supplied).

Temperature Range: -40°C to +250°C (-40°F to +482°F)

Original Language Version

VS906 Issue: 1 - 26/11/10

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly

maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND

CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY

CAUSE DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

2. INTRODUCTION & SPECIFICATION

3. DISPLAY

4. OPERATION

5. MAINTENANCE

INSTRUCTIONS FOR:

MINI DIGITAL THERMOMETER

MODEL No: VS906

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Web

4.3 Switch between Centigrade and Fahrenheit by pressing

the ºC/ºF button.

4.4 Press the HOLD button to hold the current reading on the

display (the 'HOLD' symbol will begin to flash). To see the

maximum reading of all the readings taken since switching

on press HOLD again ('MAX' will flash on the display). To

see the minimum reading of all the readings taken since

switching on press HOLD again ('MIN' will flash on the

display). To return to temperature measurement mode press

HOLD again. This cycle can be repeated at any time.

4.5 Turn the thermometer OFF by pressing the ON/OFF button

again. NOTE: Current readings are not held in memory

when the thermometer is turned off.

4.6 If the thermometer is ON but not in use it will turn itself off

after approximately 20 mins.

4.7 If the measured temperature is over 250ºC the display will

show 'H - - '.

If the measured temperature is under -40ºC the display will

show 'L - - '.

4.1 Remove the protective cover from the probe. The cover can,

if required, be stowed on the other end of the thermometer

body.

4.2 Turn the thermometer ON by pressing the ON/OFF button.

The display will show all its symbols momentarily (as shown

in fig.1) and then revert to zero. Once the tip of the probe

has sensed the temperature the display will change from

zero to that temperature.

5.1 After use, clean the probe with warm water and replace the

protective cover.

5.2 If the display appears fuzzy or faded the battery should be

replaced. (1.5V, LR44 or equivalent).

g.1

Environmental Protection

When the product is no longer required, it must be

disposed of in an environmentally protective way.

Contact your local solid waste authority for recycling

information.

Battery Removal

Remove the battery from the thermometer by rotating

the circular battery compartment cover on the back of

the casing. Lift off and tip out the battery.

Dispose of battery according to local authority

guidelines. WARNING: Do not dispose of by fire. This

could result in an explosion. Under the Waste Batteries

and Accumulators Regulations 2009, Jack Sealey Ltd

are required to inform potential purchasers of products

containing batteries (as defined within these regulations),

that they are registered with Valpak’s registered

compliance scheme. Jack Sealey Ltd’s Batteries

Producer Registration Number (BPRN) is BPRN00705.

MINI DIGITAL THERMOMETER 1

Summary of Contents

Page 1 - MINI DIGITAL THERMOMETER

 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment. F

Comments to this Manuals

No comments

Sealey VS906 User Manual

Browse online or download User Manual for Tools Sealey VS906. Sealey VS906 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Sealey VS906