Sealey VS1273 User Manual download pdf

Thankyou for purchasing this Sealey product. Manufactured to a high standard this product will, if used according to these instructions and

properly maintained, give you years of trouble free performance.

IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.

USE THIS TOOL CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE

OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. RETAIN THESE INSTRUCTIONS FOR FUTURE USE.

2. INTRODUCTION

1. SAFETY INSTRUCTIONS

INSTRUCTIONS FOR:

REAR HUB PULLER FORD TRANSIT

MODEL NO: VS1273

 WARNING! Ensure Health and Safety, local authority

and general workshop practice regulations are

adhered to when using tools.

 Observe standard workshop safety procedures.

 WARNING! Take extreme caution when using these

tools, components are heavy. Ensure the snap lock

chain is employed.

 Maintain correct balance and footing. DO NOT over

reach, ensure the floor is not slippery, wear non-slip

toe protector shoes.

 Remove loose fitting clothing, ties, watches, rings,

loose jewellery, and contain or tie back long hair.

 Wear approved eye protection, gloves and footwear.

A range of personal safety equipment is available

from your Sealey dealer.

 DO NOT use these tools for any purpose other than

those for which they have been designed.

 DO NOT use tools if damaged.

 Maintain tools in good and clean condition for best

and safest performance.

 Ensure that a vehicle which has been jacked up is

adequately supported with axle stands.

 Remove appropriate road wheels and brake calipers.

 DO NOT attempt to start engine or move vehicle

whilst in gear with tools fitted.

 Account for all tools and parts being used and do not

leave them in or near the engine.

 IMPORTANT: These instructions are provided as a

guide only. Always refer to the vehicle manufacturer’s

service instructions, or a proprietary manual, to

establish the current procedure and data.

 When not in use, clean and store the tools in their

case in a safe, dry, childproof location.

Engineered for safe removal of rear hubs on front wheel drive

Ford Transits. Fixes onto the vehicle wheel studs. Features

a cleverly designed impact force screw for the separation of

the hub from the stub axle. Supplied with snap hook chain for

added safety.

Original Language Version

VS1273 Issue: 1 - 06/03/14

3. SPECIFICATION/CONTENTS

Item Sealey Part No. Description Qty

1 VS1273.01 Adaptorange  1

2 VS1273.02 Ram 1

3 VS1273.03 Force screw barrel 1

4 VS1273.04 Snap ring 1

5 VS1273.05 M16 Nuts & Washers 5 sets

6 VS1273.06 Snap lock chain 1 length

7 VS1273.07 M8 Screw 1

• Application Ford Transit 2000 onwards.

• Front wheel drive vehicles only.

• OEM 204-595-09

g.1

1 2

Summary of Contents

Page 1 - MODEL NO: VS1273

Thankyou for purchasing this Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly m

Page 2 - 5. BEARING REMOVAL

4. OPERATION4.1. Set up (after wheel removal)4.1.1. Remove the centre hub nut.4.1.2. Offerthebossedangeadaptoroverthe5xM16hub studs

Comments to this Manuals

No comments

Sealey VS1273 User Manual

Browse online or download User Manual for Tools Sealey VS1273. Sealey VS1273 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Sealey VS1273