Sealey SM2503 User Manual download pdf (Page 3)

The SM2503 is a bench mounted mini machining centre with variable speed drive giving flexibility to handle most materials. The unit incorporates

two motors, one for milling/drilling operations and one to power the lathe. The lathe cutting feed may be power driven or advanced manually.

Thread cutting can also be done using the optional thread cutting kit. The machine is supplied with metric graduated compound scales. Complies

with Machinery Directive and is fully CE approved. The machine is supplied with all necessary tools required for setting up and adjusting. A stand

is also available as an optional extra, Model No.SM3002/ST. (Milling attachments and drill bits are not supplied.) For a full range of accessories

contact your local Sealey dealer. (See section 4 below.)

2. INTRODUCTION & SPECIFICATION

4. OPTIONAL ACCESSORIES

Specification ( Cutting )

Swing over bed............................. 140mm

Distance between centres .................... 250mm

Spindle hole taper ............................ MT2

Cross slide travel ............................ 61mm

Tailstock taper ............................... MT1

Spindle speed (variable)................100 to 2000rpm

Range of metric threads.......5 pitches ( 0.5 to 1.25mm)

Specification ( Drilling )

Max drilling/milling capacity .................... 10mm

Travel of drilling/milling spindle ................. 30mm

Drilling/milling spindle speed ........... 100 to 1300rpm

T-slot....................................... 8mm

Output power ................................150W

Net/gross weight............................40/50kg

Distance from spindle to table ................. 180mm

Distance from spindle centre to column front...... 100mm

3. CONTENTS & ASSEMBLY

 Contents: ( Not illustrated )

 Mini drilling/milling/cutting machine.

1. ‘C’ Wrench (28/32mm)

2. Drill chuck and taper shank

3. Drill chuck key

4. 3 Hex keys (3,4,6mm)

5. Double ended spanner 8-10

6. Lathe chuck key.

7. 3 External chuck jaws

8. 8mm ‘T’ nuts

9. Fuse

10. Tailstock centre

fig. 2

STEADY REST FOLLOW REST QUICK VICE (50mm) MILL CHUCK SET (MT2)

SM2503SR SM2503FR SM2503QV SM2503MCSET (3,4,5,6,8,10diam.)

2 FLUTE HSS END MILL SET COLLET SET (MT2) INDEXABLE CARBIDE END MILL

SM2503EMSET (3,4,5,6,8,10 diam.) SM2503CSET (3,4,5,6,8,10 diam.) SM2503ICEM(16mm MT2 )

METRIC THREAD CUTTING KIT TAILSTOCK CHUCK+SHANK ROLLING CENTRE HEADSTOCK CENTRE

SM2503TCK (40,42,45,48,50,54,60) SM2503TC ( MT1 10mm ) SM2503RC ( MT1 ) SM2503HC ( MT2 )

TOOL HOLDER SET(Cut off type, 70 x 2 x 10mm) CUT OFF TOOL & BORING TOOL FACEPLATE ( Diam.112mm )

SM2503THSET (Boring cutter, diam.10mm ) SM2503COBT SM2503FP ( ‘T’ slot 8mm )

 WARNING! At least two people will be required

to move the machine. Observe good lifting practice.

3.1. Unpack the product and check that all

components and tools are present and

undamaged. If any problem is noted contact your

supplier immediately.

3.2 The machine has been coated with heavy grease

to protect it in shipping. Remove the coating with

commercial degreaser, kerosene or similar

solvent before operating. Avoid getting the

solvent on rubber parts. After degreasing coat

the machined surfaces with a medium consistency machine oil.

3.3 Mounting the machine. Locate the machine on a flat, level and strong work surface. Do not locate in direct sunlight or where heavy

dust or moisture is present.

3.4 Drill the location holes in accordance with the dimensions shown in fig.2 and bolt the machine to the bench using three M6 nuts and

bolts. ( Not provided.)

fig. 1

Original Language Version

SM2503 Issue: 2 - 05/11/09

Sealey SM2503 User Manual Page 3

Comments to this Manuals

Sealey SM2503 User Manual Page 3

Comments to this Manuals

Related products and manuals for Tools Sealey SM2503