Sealey SA40 User Manual download pdf

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,

WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH

IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE

THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

2. INTRODUCTION & SPECIFICATION

 Follow workshop Health & Safety rules, regulations and conditions when using the grease gun.

 WARNING!Disconnect from air supply before changing accessories or servicing.

 Maintain the gun in good condition and replace any damaged or worn parts. Use

genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.

 WARNING! Check that the correct air pressure is maintained and not exceeded.

 Keep air hose away from heat, oil and sharp edges. Check hose for wear before each use and

ensure that all connections are secure.

 Wear approved safety gloves and eye and ear protection.

 Keep gun clean and in good working order for best and safest performance.

 Keep children and unauthorised persons away from the work area.

 DO NOT use the gun for a task it is not designed to perform.

 WARNING! DO NOT use gun if damaged or thought to be faulty. Contact your local service agent.

 WARNING! Grease is delivered at high pressure. DO NOT point the grease nozzle at yourself or others.

 DO NOT operate the trigger until the nozzle is firmly attached to the receiving grease fitting.

 DO NOT drop, throw, or abuse, the gun.

 DO NOT carry the gun by the air hose, or yank the hose from the air supply.

 DO NOT operate gun if you are tired or under the influence of alcohol, drugs or intoxicating medication.

 DO NOT direct air from the air hose at yourself or others.

 When not in use, disconnect from air supply and store in a safe, dry, childproof location.

INSTRUCTIONS FOR:

AIR GREASE GUN

MODEL No: SA40

Air Supply

Recommended hook-up is shown in fig. 1.

3.1. Ensure that the trigger is in the Off position when connecting to the air supply.

 WARNING! Ensure that the air supply is clean and is between 30-150psi. Too high an air

pressure and/or unclean air will shorten the life of the gun due to excessive wear, and may

be dangerous, causing damage and/or personal injury.

3.2. Drain the compressor air tank daily. Water in the air line will damage the gun.

3.3. Clean compressor air inlet filter weekly.

3. PREPARATION FOR USE

Specification

Air Pressure ............... 30-150psi

Delivery Pressure ........ 1200-6000psi

Air Inlet .....................1/4”BSP

Optional Flexible Extension ... SA40/09A

Die-cast head and body with chromed steel grease tube. Includes rigid extension tube and 4-jaw coupler.

Trigger operated single impulse gun with 3-way fill and air bleed valve. Accepts 400g grease

cartridges, bulk or manual fill.

Original Language Version

SA40 Issue: 2 - 08/01/10

1 2 3

Summary of Contents

Page 1 - AIR GREASE GUN

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly mai

Page 2 - 4. CHARGING INSTRUCTIONS

4. CHARGING INSTRUCTIONS WARNING! Ensure that you read, understand and apply the safety instructions before use.4.1. Cartridge Loading (fig. 2)

Page 3 - 6. TROUBLESHOOTING

 WARNING!Disconnect gun from air supply before changing accessories, servicing or performing maintenance. Replace or repair damaged parts.

Comments to this Manuals

No comments

Sealey SA40 User Manual

Browse online or download User Manual for Tools Sealey SA40. Sealey SA40 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Sealey SA40