Sealey AVR2500A User Manual download pdf

 GENERAL SAFETY.

 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment.

 WARNING! TRAPPING DANGER – Although the vehicle lift movements are slow in operation, keep hands and limbs away from the steelwork

during elevating and lowering. The lowering speed increases during decent and decreases whilst elevating.

 Keep the work area clean, uncluttered and ensure there is adequate lighting.

 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip steel toe capped shoes.

 Remove ill-fitting clothes. Remove ties, watches, rings, other loose jewellery.

 Familiarise yourself with the applications, limitations and potential hazards of the vehicle lift.

 DO NOT use to achieve a task the vehicle lift was not designed to perform.

 DO NOT allow untrained persons to assemble or use the vehicle hydraulic lift.

 DO NOT lift the vehicle with people inside.

 PRE OPERATIONAL SAFETY and *SAFETY FEATURES.

 DO NOTexceed the load capacity of 2.5tonne. See your vehicle manual for weight.*In the pump is a calibration valve to prevent lifting

of loads exceeding capacity.

 Ensure adequate level space around the vehicle for the operator and the lift.

 DO NOT operate the vehicle lift if parts are damaged or missing as this may cause failure and/or personal injury.

 Before commencing lift, make a visual inspection of the vehicle lift to ensure there is no sign of damage or loose fixings.

 DO NOT use the unit and refer to your local Sealey dealer for advice on replacement parts.

 Tighten all hydraulic and pneumatic fittings and ensure hydraulic system is bled and oil level is correct.

 Before commencing lift ensure the vehicle bodywork is structurely sound.

 Before commencing the vehicle lift apply the vehicle hand brake and leave in first gear. Refer also to section 5.8.1.

 *Be aware of an automatic valve on the ram cylinder infeed on the lift which prevents oil spilling out in the event of accidental damage to the

delivery hose.

 OPERATIONAL SAFETY.

 DO NOT stand on or drive over the hydraulic pump "umbilical" hose or mains air line.

 Position the pump, in use, such that there is no tripping hazard. Return the pump to the tray in the base frame when not in use.

 After lifting to required working height, ensure that both pawl bars are engaged in a channel notch. Refer to fig.7.

 POST OPERATIONAL SAFETY.

 When not in use, place the pump back on its tray in the base frame, clean and store the lowered vehicle lift in a safe, dry, childproof location.

 Maintain the vehicle lift in good condition. Replace damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and

will invalidate the warranty.

 WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that

may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into

this product, but must be applied by the operator.

Model No: ............................... AVR2500A

Maximum Load: .............................. 2500kg

Maximum Lift Height: . . . . . . . . . . . . . . . . . . . . . . . . . 1000mm

Min Overall Height: ........................... 125mm

Overall Width:............................... 1600mm

Safety Locking Positions: ............................ 6

Weight: ...................................... 270kg

Manoeuvrable low profile lift with retracting wheels for easy positioning under vehicles. Four multi-positioning, height adjustable saddles with

rubber pads. Maximum lift of 1000mm with six height locking positions. Suitable for use with a wide range of vehicles.

Original Language Version

AVR2500A Issue: 1 - 07/11/14

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT

CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL

INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

INSTRUCTIONS FOR:

AIR HYDRAULIC VEHICLE LIFT 2.5TONNE

MODEL NO: AVR2500A

1. SAFETY

2. INTRODUCTION

3. SPECIFICATION

3.1 Lift specifications

Read the manual

instructions

Crushing danger

Wear safety

footwear

1 2 3 4 5 6

Summary of Contents

Page 1 - AVR2500A

 GENERAL SAFETY. WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equ

Page 2 - Original Language Version

g.13.2 Lift dimensions255055500Steps of 1001000 max1600 max1170 min1200 max140 min125Ø120Pad sweep radius120 min292 max3.3 Vehicle weight distribut

Page 3 - 4. CONTENTS

4.1. Assembly4.1.1. The major structural components including the hydraulic ram are pre-assembled, requiring only attachments. Use the picture b

Page 4 - 5. OPERATION

5.6. Operating the pump (fig.6)5.6.1. Elevate by depressing the pump pedal position "A" and hold.5.6.2. Park the lift at any pawl prop no

Page 5 - 6. TROUBLESHOOTING

7. MAINTENANCE7.1. Before each use, check the vehicle lift to ensure it is not damaged or worn. If in any doubt DO NOT use the unit. Remove it fro

Page 6 - 01284 703534

Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email [email protected] or

Comments to this Manuals

No comments

Sealey AVR2500A User Manual

Browse online or download User Manual for Tools Sealey AVR2500A. Sealey AVR2500A User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Sealey AVR2500A