Sealey SAC55075B User Manual download pdf (Page 4)

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

01284 757500

01284 703534

sales@sealey.co.uk

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Web

fig.8

Fault Cause Remedy

Pressure drop in the

tank.

Air leaks at

connections.

Run compressor to max.

pressure, switch off.

Brush soap solution over

connections and look for

bubbles. Tighten connections

showing leaks. If problem

persists contact Authorised

Service Agent.

Pressure switch

valve leaks when

compressor is idle.

Non-return valve seal

defective.

Discharge all tank pressure.

Referring to fig.8, unscrew

valve cap 'A'. Clean rubber

disc 'B' and its seat. Refit all

parts accurately.

Compressor stops

and does not restart.

Power failure.

Motor failure.

Check electricity supply and

fuse.

Contact Authorised Service

Agent.

Compressor does

not stop at max

pressure.

Pressure switch fault. Contact Authorised Service

Agent.

Compressor does

not reach max

pressure.

Filter clogged.

Head gasket or valve

fault.

Replace filter element.

Contact Authorised Service

Agent.

Compressor noisy

with metallic knock.

Low oil level.

Bearing or piston

damage.

Turn off and top up oil

immediately.

Contact Authorised Service

Agent.

Original Language Version

Parts support is available for this product. To obtain a parts listing and/or diagram,

please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.

Environmental Protection.

Recycle unwanted materials instead of disposing of them as

waste. All tools, accessories and packaging should be sorted,

taken to a recycle centre and disposed of in a manner which

is compatible with the environment.

WEEE Regulations.

Dispose of this product at the end of its working life in compliance

with the EU Directive on Waste Electrical and Electronic Equipment.

When the product is no longer required, it must be disposed of in an

environmentally protective way. Contact your local solid waste

authority for recycling information.

SAC55075B Issue: 1 - 24/12/14

6. TROUBLESHOOTING

fig.6

fig.7

5.7. Recommended oils

Synthetic oil suitable for temperatures ranging from -5°C to 45°C:

viscosity 5W50. We do not recommend using mineral oil in these

compressors.

Part No. Qty. Description

FSO1 1ltr x 12 Compressor oil fully synthetic

FSO1S 1ltr x 1 Compressor oil fully synthetic

FSO5 5ltr x 1 Compressor oil fully synthetic

5.8. IMPORTANT WARNING - Air contaminants taken into the

 compressorwillaffectoptimumperformance.Example:Bodyller

 dustorpaintoverspraywillclogthepumpintakelterandmay

cause internal damage to pump/motor components. Please note

that any parts damaged by any type of contamination will not be

covered by warranty.

Inspection of pressure tank both inside and out.

Under the PRESSURE SYSTEMS SAFETY REGULATIONS 2000 it is

the responsibility of the owner of the compressor to initiate a system of

inspectionthatbothdenesthefrequencyoftheinspectionandappoints

apersonwhohasspecicresponsibilityforcarryingouttheinspection.

1 2 3 4 5

Comments to this Manuals

No comments

Sealey SAC55075B User Manual Page 4

Comments to this Manuals

Related products and manuals for Equipment Sealey SAC55075B