Sealey VS7023A User Manual download pdf

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL

REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE

PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY

AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

INSTRUCTIONS FOR:

BEARING & BUSH REMOVAL/

INSTALLATION KIT 26pcs

MODEL No: VS7023A

1.1 GENERAL SAFETY

WARNING! Ensure Health & Safety, local authority, and general

workshop practice regulations are adhered to when using this

tool.

 WARNING! Familiarise yourself with the specific applications

and limitations of the kit, as well as any potential hazards.

 This kit should be used in conjunction with inspection

maintenance procedures recommended in the vehicle

manufacturer’s manual.

 Ensure that the kit is correct for the task.

 Wear the appropriate personal protective equipment for the

task. A full range is available from your Sealey dealer.

 DO NOT use the kit for any purpose other than that for which it

is designed.

 Ensure that the vehicle is properly supported with axle stands

before working under the vehicle.

Ensure there is adequate lighting prior to using the kit. A range

of inspection lamps are available from your Sealey dealer.

 Keep children and unauthorised persons away from the working

area.

DO NOT use the kit if any parts are damaged or missing, as this

may cause failure and/or personal injury.

DO NOT use the kit when you are tired, or under the influence of

alcohol, drugs or intoxicating medication.

 After use, store in a safe, dry childproof area.



ALWAYS KEEP FORCE SCREW

WELL LUBRICATED. MOLYBDENUM/

COPPER BASED RECOMMENDED.

DO NOT USE AIR TOOLS

1. SAFETY INSTRUCTIONS

2. INTRODUCTION

The force screw maximum recommended torque is 155Nm (M16X1.5), 99Nm (M14X1.5), 60Nm (M12X1.5), 33Nm (M10X1.5). Exceeding these

torque values may shorten the life of the force screws. The force screws are considered to be consumable items and are NOT covered

under warranty.

Comprehensive kit for fast and effective in-situ removal/installation of wheel bearings/suspension bushes and seals.

Reduces the possibility of damaging the bearing/suspension housings. Supplied with 4 stepped end plates and 4 force

screws in carry case. Plates and sleeves can also be used in a standard workshop press when in-situ access isn't

possible.

3. CONTENTS

3.1 End Plates (Fig.1)

Two plates with each one having a stepped side

marked 'A' and a stepped side marked 'B'

3.2 Force Screws (Fig.2)

Four different diameter force screws, each 450mm

in length. Each force screw is supplied with two nuts

and two thrust washers.

3.3 'A' Sleeves (Fig.3)

Eleven different diameter gold coloured sleeves, with

a stepped end for use with side-A of the end plates

and a force end with U-shaped inspection slot.

3.4 'B' Sleeves (Fig.4)

Nine different diameter silver coloured sleeves, with

a stepped end for use with side-B of the end plates

and a force end with U-shaped inspection slot.

Fig.1

VS7023A Issue No.1 - 14/11/12

Original Language Version

1 2 3

Summary of Contents

Page 1 - INSTALLATION KIT 26pcs

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly mai

Page 2 - * Max recommended

Fig.2Sleeve 'A'(11 pieces)SizesD44 x d34D46 x d36D54 x d44D56 x d46D58 x d48D66 x d56D68 x d58D70 x d60D78 x d68D80 x d70D82 x d72Sleeve &ap

Page 3 - IP32 7AR

Original Language VersionNOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and com

Comments to this Manuals

No comments

Sealey VS7023A User Manual

Browse online or download User Manual for Tools Sealey VS7023A. Sealey VS7023A User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Sealey VS7023A