Sealey SA681 User Manual download pdf

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL

REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE

PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL INJURY

AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

 Follow all workshop safety rules, regulations, and conditions when using wrench.

 WARNING!Disconnect from air supply before changing accessories or servicing.

 Maintain the wrench in good condition and replace any damaged or worn parts. Use

genuine parts only. Non-authorised parts may be dangerous and will invalidate the warranty.

 WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.

 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each

use and ensure that all connections are secure.

 Only use impact sockets which are specifically designed for use with a impact wrench.

 Wear approved safety eye/face shield, ear defenders, and hand protection.

 WARNING! Due to the possible presence of asbestos dust from brake linings, when working

around vehicle brake systems we recommend you wear suitable respiratory protection

 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

 Keep children and unauthorised persons away from the working area.

 DO NOT use the wrench for a task it is not designed to perform.

 WARNING! DO NOT use wrench if damaged or thought to be faulty. (Contact Service Agent).

 DO NOT use wrench unless you have been instructed in its use by a qualified person.

 DO NOT drop, throw or abuse the wrench as it is a precision tool.

 DO NOT carry the wrench by the air hose, or yank the hose from the air supply.

 DO NOT operate wrench if you are tired, under the influence of alcohol, drugs or intoxicating

medication.

 DO NOT carry wrench with your hand on the power trigger in order to avoid unintentional

starting.

 DO NOT direct air from the air hose at yourself or others.

 When not in use disconnect from air supply and store in a safe, dry, childproof location.

INSTRUCTIONS FOR:

1” AIR IMPACT WRENCH

MODEL No's: SA680.V2 & SA681.V2

2. INTRODUCTION & SPECIFICATIONS

MODEL.................SA680.V2

Drive size ....................1”Sq

Working/Max torque ....1400/1600ft/lb

Ultimate torque .............1800ft/lb

Speed ................... 3300rpm

Air consumption ............. 12cfm

Operating pressure............90psi

Air inlet size .............. 1/2” BSP

Sound Power .............101dB(A)

Sound Pressure:............90dB(A)

Vibration .................. 6.5m/s²

Uncertainty ................ 2.6m/s²

Weight ....................10.5kg

MODEL.................SA681.V2

Drive size ................... 1”Sq

Working/Max torque .... 1100/1450ft/lb

Ultimate torque .............1800ft/lb

Speed ................... 3300rpm

Air consumption ..............12cfm

Operating pressure............90psi

Air inlet size ..............1/2” BSP

Sound Power .............101dB(A)

Sound Pressure:............90dB(A)

Vibration .................. 6.5m/s²

Uncertainty ................ 2.6m/s²

Weight ....................11.6kg

Heavy duty 1" air tool suitable for commercial and agricultural vehicle use. Pin clutch mechanism

gives high power:weight ratio. Straight pattern and top side exhaust allow wide variety of

applications. Supplied with side handle and spring balance hoop. The SA681.V2 has a long anvil

to allow use on wheels with a deep dish.

Original Language Version

SA680.V2, SA681.V2 Issue: 4(SP) - 17/12/13

1 2 3 4

Summary of Contents

Page 1 - SA680.V2 & SA681.V2

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly mai

Page 2 - 4. OPERATING INSTRUCTIONS

3.1. Air Supply 3.1.1. Ensure wrench air valve (or trigger) is in the "off" position before connecting to the air supply.3.1.2. You will re

Page 3 - 5. MAINTENANCE

  WARNING!Disconnect wrench from air supply before changing accessories, servicing or performing maintenance.Replace or repair damaged parts. U

Page 4 - SA681.V2

WARNING! – Risk of Hand Arm Vibration Injury.This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately.This tool is subject

Related models: SA680 | SA682 | SA291 | SA6005 | GSA02 | SA4 | SA602L | SA6001 | SA686 |

Comments to this Manuals

No comments

Sealey SA681 User Manual

Browse online or download User Manual for Tools Sealey SA681. Sealey SA681 User Manual

Summary of Contents

Related models: SA680 | SA682 | SA291 | SA6005 | GSA02 | SA4 | SA602L | SA6001 | SA686 |

Comments to this Manuals

Related products and manuals for Tools Sealey SA681