search

Sealey SA6001 User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 1
4. OPERATING INSTRUCTIONS
WARNING! Ensure you read, understand and apply safety instructions before use.
4.1 Only use impact sockets which are specifically designed for use with a impact wrench.
4.2 Connect the wrench to the air hose as in chapter 3.
4.3 Place the socket over the subject nut and depress the trigger to operate the wrench.
4.4 To change direction use the dial located on the rear, this also controls the power of the
wrench.
DO NOT use any additional force upon the wrench in order to remove a nut.
DO NOT allow wrench to free run for an extended period of time as this will reduce bearing
life.
WARNING! Ensure the air supply is clean and does not exceed
90 psi while operating the wrench. Too high an air pressure and/or
unclean air will shorten the product life due to excessive wear, and
may be dangerous causing damage and/or personal injury.
3.1 AIR SUPPLY
3.1.1 Ensure wrench air valve (or trigger) is in the "off" position before
connecting to the air supply.
3.1.2 You will require an air pressure of 90psi, and an air flow according to specification.
3.1.3 Drain the compressor air tank daily. Water in the air line will damage the wrench.
3.1.4 Clean compressor air inlet filter weekly. Recommended hook-up procedure is shown in fig 1.
3.1.5 Line pressure should be increased to compensate for unusually long air hoses (over 8
metres). The minimum hose diameter should be 1/4” I.D. and fittings must have the same
inside dimensions.
3.1.6 Keep hose away from heat, oil and sharp edges. Check hose for wear, and make certain
that all connections are secure.
3.2 COUPLINGS
Vibration may cause failure if a quick change coupling is connected directly to the wrench.
To overcome this, connect a leader hose to the wrench. A quick change coupling may then
be used to connect the leader hose to the air line recoil hose. See fig 1 & 2.
3. PREPARING WRENCH FOR USE
fig 1
fig 2
Original Language Version
SA6001.V2 Issue: 4 (SP) - 22/08/13
© Jack Sealey Limited 2013
Page view 1
1 2 3 4

Comments to this Manuals

No comments
Related products and manuals for Tools Sealey SA6001
Tools Sealey SA602 User Manual   (3 pages)
Tools Sealey SA686 User Manual   (4 pages)
Tools Sealey SA141 User Manual   (3 pages)
Tools Sealey SA4 User Manual   (4 pages)
Tools Sealey SA604 User Manual   (4 pages)
Tools Sealey SA6004 User Manual   (3 pages)
Tools Sealey SA59 User Manual   (5 pages)
Tools Sealey SA91 User Manual   (3 pages)
Tools Sealey SA2003KIT User Manual   (4 pages)
Tools Sealey SA2004KIT User Manual   (5 pages)
Tools Sealey SA791 User Manual   (3 pages)
Tools Sealey SA789 User Manual   (3 pages)
Tools Sealey SA0615KIT User Manual   (7 pages)
Tools Sealey SA792 User Manual   (4 pages)
Tools Sealey SA50 User Manual   (4 pages)
Tools Sealey SA52 User Manual   (4 pages)
Tools Sealey SA28 User Manual   (3 pages)
Tools Sealey SA649 User Manual   (3 pages)
Tools Sealey SA21/S User Manual   (4 pages)
Tools Sealey SA608 User Manual   (4 pages)

Conceptronic C10-696 manuales

Manuales del propietario y guías del usuario para Hdd / ssd recintos Conceptronic C10-696.
Ofrecemos 1 manuales en pdf Conceptronic C10-696 para descargar gratis por tipos de documentos: Ficha de datos


Conceptronic C10-696 Ficha de datos (3 paginas)


Marca: Conceptronic | Categoria: HDD/SSD enclosures | Tamaño: 0.22 MB |

 

Tabla de contenidos

CHD2MUB C20-252

1




Más productos y manuales para Hdd / ssd recintos Conceptronic

Modelos Tipo de documento
C20-251 Ficha de datos   Conceptronic 2,5" Harddisk Box Mini White USB powered, 3 paginas
C20-152 Ficha de datos   Conceptronic 2,5" Harddisk Box Mini USB 3.0 USB powered, 3 paginas
C20-150 Ficha de datos   Conceptronic 2,5" Harddisk Box USB 3.0 USB powered, 3 paginas
C20-258 Ficha de datos   Conceptronic 2,5" Harddisk Box Mini Violet USB powered, 3 paginas
C05-210 Ficha de datos   Conceptronic 3,5 inch USB hard disk box for SATA hard disk, 3 paginas
C05-500 Ficha de datos   Conceptronic 2,5 / 3,5 inch hard disk docking station eSATA/USB, 3 paginas
CHD3SATA Ficha de datos   Conceptronic Serial ATA External Hard disk box 3.5 “., 1 paginas
C10-393 Ficha de datos   Conceptronic Grab'n'GO 2.5” Hard Disk Box eSATA/USB 2.0, 3 paginas
C05-326 Ficha de datos   Conceptronic USB SATA HDD 2.5" BLACK USB powered, 3 paginas
C10-135 Ficha de datos   Conceptronic 3,5 inch USB/e-SATA hard disk box, 3 paginas
C05-106 Ficha de datos   Conceptronic USB 2.0 & Firewire Harddisk Box 3.5", 1 paginas
C05-324 Ficha de datos   Conceptronic 3,5 inch HardDiskBox DualBay, 3 paginas
C20-253 Ficha de datos   Conceptronic 2,5" Harddisk Box Mini Blue USB powered, 3 paginas
C05-209 Ficha de datos   Conceptronic 2,5 inch USB hard disk box for SATA hard disk, 3 paginas
CHD3U Ficha de datos   Conceptronic USB 2.0 Hard Disk Box 3.5", 1 paginas

  • Infinite-dreams WATASHI Randell Easy Weigh EE
  • Chauvet Mounting kits Dolmar Power hedge trimmers Epson Gaming controls Roland Audio equalizers Audiovox Camcorders
  • Casio SE-C3500 Kodak 305 Wacker Neuson WL 30 Grizzly G0462 Whirlpool AGS 646/WP
  • Epson R2400 User Manual BMW M COUPE 2002 Owner's Manual Chrysler 300 SRT8 Owner's Manual Arcam DiVA A85 Operations Instructions Porter-cable H1000IS-W User Manual

    • © 2020, manymanuals.com. All rights reserved. | 0.287 s |
    Manymanuals.com Manymanuals.de Manymanuals.fr Manymanuals.it
    Manymanuals.pl Manymanuals.cz Manymanuals.es Manymanuals-pt.com