Sealey BB1502 User Manual download pdf (Page 2)

Model No:........................................................................BB1502

Motor Power: ...................................370W

Supply: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V

Fuse rating: ...................................... 5A

Axle Diameter: ..................................13mm

No Load Speed : ............................. 2850rpm

Wheel diameter: ................................150mm

Weight: ..........................................9kg

4.1. Installation

4.1.1. Bolt the polisher securely to a workbench using the base securing holes as a template. Check that all assembly nuts and bolts are

secure before powering. DO NOT block the 4 motor ventillation paths through the base.

4.2. Wheel fitting (fig.1)

4.2.1. Place the spacer over the axle shoulder.

4.2.2. "Sandwich" the selected buffing wheel between the clamp rings and secure with the hexagon nut, hand tight. (The axle threaded

ends are handed LH and RH)

4.2.3 Tighten the nuts enough to grip without crushing the buffing wheel. Wheel rotation, in use, will tighten the hexagon nut.

Designed for quick and easy smoothing/polishing of metal and other materials. Efficient 370W (Model BB1502) and 550W (Model BB2002)

motors provide sufficient power for most tasks, while the cast iron base reduces vibration. Supplied with fine and course buffing/polishing

wheels and fitted ASTA approved plug.

 DO NOT touch the workpiece immediately after polishing as it may be very hot.

 DO NOT hold unsecured work in your bare hands, and DO NOT touch the buffing wheel whilst operating, or whilst plugged into the

mains power.

 DO NOT leave the polisher running unattended.

 DO NOT operate the polisher when you are tired or under the influence of alcohol, drugs or intoxicating medication.

 When not in use, switch the polisher off and remove the plug from the power supply.

2. INTRODUCTION

3. SPECIFICATION

Model No:........................................................................BB2002

Motor Power: ...................................550W

Supply: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V

Fuse rating: ..................................... 13A

Axle Diameter: ..................................16mm

No Load Speed : ............................. 2850rpm

Wheel diameter: ................................200mm

Weight: .........................................10kg

4. ASSEMBLY

RH THREAD END

LH THREAD END

"I/O" On/Off

Switch

M12 (Model No BB1502)

M16 (Model No BB2002)

Bufng wheel

Clamp ring

Spacer

Hex nut

RH/LH

Direction of rotation

g.1

BB1502 BB2002 Issue: 1 - 06/01/15

Original Language Version

Motor vent (4 sides)

1 2 3

Comments to this Manuals

No comments

Conceptronic C10-696 Ficha de datos (3 paginas)

Marca: Conceptronic | Categoria: HDD/SSD enclosures | Tamaño: 0.22 MB |

Tabla de contenidos

CHD2MUB C20-252

Más productos y manuales para Hdd / ssd recintos Conceptronic

Modelos	Tipo de documento
C20-251	Ficha de datos Conceptronic 2,5" Harddisk Box Mini White USB powered, 3 paginas
C20-152	Ficha de datos Conceptronic 2,5" Harddisk Box Mini USB 3.0 USB powered, 3 paginas
C20-150	Ficha de datos Conceptronic 2,5" Harddisk Box USB 3.0 USB powered, 3 paginas
C20-258	Ficha de datos Conceptronic 2,5" Harddisk Box Mini Violet USB powered, 3 paginas
C05-210	Ficha de datos Conceptronic 3,5 inch USB hard disk box for SATA hard disk, 3 paginas
C05-500	Ficha de datos Conceptronic 2,5 / 3,5 inch hard disk docking station eSATA/USB, 3 paginas
CHD3SATA	Ficha de datos Conceptronic Serial ATA External Hard disk box 3.5 “., 1 paginas
C10-393	Ficha de datos Conceptronic Grab'n'GO 2.5” Hard Disk Box eSATA/USB 2.0, 3 paginas
C05-326	Ficha de datos Conceptronic USB SATA HDD 2.5" BLACK USB powered, 3 paginas
C10-135	Ficha de datos Conceptronic 3,5 inch USB/e-SATA hard disk box, 3 paginas
C05-106	Ficha de datos Conceptronic USB 2.0 & Firewire Harddisk Box 3.5", 1 paginas
C05-324	Ficha de datos Conceptronic 3,5 inch HardDiskBox DualBay, 3 paginas
C20-253	Ficha de datos Conceptronic 2,5" Harddisk Box Mini Blue USB powered, 3 paginas
C05-209	Ficha de datos Conceptronic 2,5 inch USB hard disk box for SATA hard disk, 3 paginas
CHD3U	Ficha de datos Conceptronic USB 2.0 Hard Disk Box 3.5", 1 paginas

Sealey BB1502 User Manual Page 2

Comments to this Manuals

Conceptronic C10-696 manuales

Conceptronic C10-696 Ficha de datos (3 paginas)

Tabla de contenidos

Más productos y manuales para Hdd / ssd recintos Conceptronic

Sealey BB1502 User Manual Page 2

Comments to this Manuals

Related products and manuals for Tools Sealey BB1502

Conceptronic C10-696 manuales

Conceptronic C10-696 Ficha de datos (3 paginas)

Tabla de contenidos

Más productos y manuales para Hdd / ssd recintos Conceptronic