Sealey GSS1515 User Manual

INSTRUCTIONS FOR:GALVANIZED STEEL SHEDMODEL No: GSS1515Thank you for purchasing a Sealey product. Manufactured to a high standard this pr

Step 4: Assemble the roof panel.Place 8 and 8 the sheeting on your work table and join together with the self tapping screws per the diagram.Now tap o

Step 5: Assemble the front wall panel and front door.Place 4 the sheeting on the work table. Fit 20D the top channel, 20E the bottom channel 41B the j

Step 6: Assemble the front wall panel and front door.Fit 5R the pre-assembled door to the front wall panel per the diagram. Use riveter to x the door

Step 7: Fit the panels together.Attach the side walls to the back wall, then the front wall, then the roof. Fix all the components using the self tapp

RAWL BOLTNow t the bolt down kit per the diagram. Strengthen your mid wall brace by applying 72 the mid wall brace bracket on each corner.

Apply channel safety cover L type on channel 32 and R type on channel 33R. Apply the self-tapper covers on the screws xed on the wall to prevent acci

Sealey sheds are weatherproof, however, heavy winds with driving rain could cause your shed to leak. Condensation will also occur in some weather cond

Concrete slab: Please ensure that your site is level. It is recommended that your slab is 100mm thick and you use builders plastic and F52 reinforcing

Tools Required:

Step 1：Check all parts against the component listLay out all parts with number facing outwards and check off against parts listPicture Description Com

Channel channel 1508 zinc front 20E 1Channel channel 1515 zinc side wall 25 2Channel channel 1898 zinc front 22 1Channel channel 775 zinc front 23 1Ch

Shed Overview

Step 2: Assemble rear wall panels.You will nd it easier to assemble your shed using sawhorses with timber studs attached ( timber needs to be the sam

Now t 31 mid wall channel to the sheeting and position it using the self tapping screws. Please note that the groove should face downwards. Position

Step 3: Assemble side wall panelsPlace 2R’ and 7R the sheeting on your work table and tap or slide in 25 top channel and 20A bottom channel. Fix and p