Sealey SA623 User Manual download pdf

1. SAFETY INSTRUCTIONS

3 Follow all workshop health & safety rules, regulations, and conditions when using screwdriver.

p WARNING!Disconnect from air supply before changing accessories or servicing.

3 Maintain screwdriver in good condition and replace any damaged or worn parts. Use

genuine parts only. Non-authorised parts may be dangerous and will invalidate the warranty.

p WARNING! Check correct air pressure is maintained and not exceeded. We recommended

90psi.

3 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each

use and ensure that all connections are secure.

3 Wear approved safety eye and ear protection.

3 Keep screwdriver bits clean and in good condition for best and safest performance.

3 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

3 Secure non stable work piece with a clamp, vice or other adequate holding device.

3 Ensure the screwdriver bit is secure in the chuck.

3 Avoid unintentional starting.

3 Keep children and unauthorised persons away from the working area.

7 DO NOT get the screwdriver wet or use in damp or wet locations.

7 DO NOT hold the workpiece by hand. Use clamps or a vice to secure the workpiece.

7 DO NOT use the screwdriver for a task it is not designed to perform.

p WARNING! DO NOT use screwdriver if damaged or faulty. Contact your local service agent.

7 DO NOT use screwdriver unless you have been instructed in its use by a qualified person.

7 DO NOT drop, throw or abuse the screwdriver.

7 DO NOT carry the screwdriver by the air hose, or yank the hose from the air supply.

7 DO NOT operate screwdriver if you are tired, under the influence of alcohol, drugs or

intoxicating medication.

7 DO NOT carry screwdriver with your hand on the power trigger in order to avoid unintentional

starting.

7 DO NOT direct air from the air hose at yourself or others.

3 When not in use disconnect from air supply and store in a safe, dry, childproof location.

2. INTRODUCTION & SPECIFICATIONS

Chuck size ...............6mm Hex

Free speed .............. 11000rpm

Torque range ..............175lb.in

Air consumption .............. 3cfm

Operating pressure............90psi

Air inlet size .............. 1/4” BSP

Weight .....................0.7kg

Noise .....................92dB.A

Compact design is ideal for accessing work

areas where space is limited. Composite

lightweight housing reduces effects of chill on

operator’s hands. Fully reversible with thumb

control on side of motor housing. Air motor with

quality bearings for smooth and powerful

operation. Features 6mm quick-release chuck

for fast bit changes. Suitable for the professional

workshop.

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.

USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE

DAMAGE OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

INSTRUCTIONS FOR:

AIR PISTOL SCREWDRIVER

PREMIER

MODEL No: SA623.V2

Original Language Version

SA623.V2 Issue: 1 - 17/10/11

1 2 3

Summary of Contents

Page 1 - SA623.V2

1. SAFETY INSTRUCTIONS3 Follow all workshop health & safety rules, regulations, and conditions when using screwdriver. p WARNING!Disconnect

Page 2 - 4. OPERATING INSTRUCTIONS

3.1. Air Supply 3.1.1. Ensure screwdriver trigger is in "off" position before connecting to air supply.3.1.2. You will require an air pre

Page 3 - 5. MAINTENANCE

p WARNING!Disconnect screwdriver from air supply before changing accessories, servicing or performing maintenance.Replace or repair damaged part

Comments to this Manuals

No comments

Sealey SA623 User Manual

Browse online or download User Manual for Tools Sealey SA623. Sealey SA623 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Sealey SA623