Sealey S01002 User Manual download pdf

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,

WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH

IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL INJURY AND WILL INVALIDATE THE

WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

 Follow all workshop safety rules, regulations, and conditions when using wrench.

 WARNING!Disconnect from air supply before changing accessories or servicing.

 Maintain the wrench in good condition and replace any damaged or worn parts. Use

genuine parts only. Non-authorised parts may be dangerous and will invalidate the warranty.

 WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.

 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each

use and ensure that all connections are secure.

 Only use impact sockets which are specifically designed for use with an impact wrench.

 Wear approved safety eye/face shield, ear defenders, and hand protection.

 WARNING! Due to the possible presence of asbestos dust from brake linings, when working

around vehicle brake systems we recommend you wear suitable respiratory protection.

 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

 Keep children and non essential persons away from the working area.

 DO NOT use the wrench for a task it is not designed to perform.

 WARNING! DO NOT use wrench if damaged or thought to be faulty (Contact Service Agent).

 DO NOT use wrench unless you have been instructed in its use by a qualified person.

 DO NOT carry the wrench by the air hose, or yank the hose from the air supply.

 DO NOT operate wrench if you are tired, under the influence of alcohol, drugs or intoxicating

medication.

 DO NOT carry wrench with your hand on the power trigger in order to avoid unintentional

starting.

 DO NOT direct air from the air hose at yourself or others.

 When not in use disconnect from air supply and store in a safe, dry, childproof location.

2. INTRODUCTION & SPECIFICATIONS

Drive: ........................... ½” Sq

WorkingTorque: ............220lb/ft/299Nm

Maximum Torque: ...........260lb.ft/345Nm

Ultimate Torque: ............390lb/ft/530Nm

Free Speed: ....................7000rpm

Air Consumption: ................... 5cfm

Operating Pressure: ...........90psi

Air Inlet Size: ..............¼” BSP

Noise Power: .............106dB(A)

Noise Pressure: ........... 95 dB(A)

Load Vibration(k=1.5m/s²) .... 9.2m/s² ...

Weight (wrench only):..........2.2kg

S01002 Issue: 1 -

15/03/13

Original Language Version

Fitted with rocking-dog hammer and hardened impact anvil. Features four-position adjustable

air/torque control and reversible action. Suitable for the DIY enthusiast and light garage use.

Model No:......S01002

INSTRUCTION MANUAL

AIR IMPACT WRENCH

½” SQ DRIVE

MODEL NO.

S01002

1 2 3 4

Summary of Contents

Page 1 - MODEL NO

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly mai

Page 2 - 5. MAINTENANCE

3.1. Air Supply 3.1.1. Ensure wrench air valve (or trigger) is in the "off" position before connecting to the air supply.3.1.2. You will re

Page 3 - Environmental Protection

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prio

Page 4

WARNING! – Risk of Hand Arm Vibration Injury.This tool may cause Hand Arm Vibration Syndrome if its use is not adequately managed.This tool is subject

Related models: SA2/TS | SA2 | SA4 | SA602L | SA6001 | SA686 | SA681 | SA680 | SA682 | SA291 | SA6005 | GSA02 | GSA01 | SA56 | SA655 | SA29/S | SA297 | GSA6002 |

Comments to this Manuals

No comments

Sealey S01002 User Manual

Browse online or download User Manual for Tools Sealey S01002. Sealey S01002 User Manual

Summary of Contents

Related models: SA2/TS | SA2 | SA4 | SA602L | SA6001 | SA686 | SA681 | SA680 | SA682 | SA291 | SA6005 | GSA02 | GSA01 | SA56 | SA655 | SA29/S | SA297 | GSA6002 |

Comments to this Manuals

Related products and manuals for Tools Sealey S01002