Sealey SBS35 User Manual download pdf

1.1 ELECTRICAL SAFETY

 WARNING! It is the responsibility of the owner and the operator to read, understand and comply with the

following:You must check all electrical products, before use, to ensure that they are safe. You must inspect

power cables, plugs, sockets and any other connectors for wear or damage. You must ensure that the risk of

electric shock is minimised by the installation of appropriate safety devices. A Residual Current Circuit Breaker

(RCCB) should be incorporated in the main distribution board. We also recommend that a Residual Current

Device (RCD) is used. It is particularly important to use an RCD with portable products that are plugged into a

supply which is not protected by an RCCB. If in any doubt consult a qualified electrician. You may obtain a

Residual Current Device by contacting your Sealey dealer.

You must also read and understand the following instructions concerning electrical safety.

1.1.1 The Electricity at Work Act 1989 requires that all portable electrical appliances, if used on business

premises, are tested by a qualified electrician, using a Portable Appliance Tester (PAT), at least once a

year.

1.1.2 The Health & Safety at Work Act 1974 makes owners of electrical appliances responsible for the safe

condition of those appliances and the safety of the appliance operators. If in any doubt about

electrical safety, contact a qualified electrician.

1.1.3 Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power

supply. See 1.1.1 and 1.1.2 and use a Portable Appliance Tester (PAT).

1.1.4 Ensure that cables are always protected against short circuit and overload.

1.1.5 Regularly inspect power supply cables and plugs for wear or

damage and check all connections to ensure that none are loose.

1.1.6 Important: Ensure that the voltage marked on the appliance matches

the power supply to be used and that the plug is fitted with the

Correct fuse - see fuse rating at right.

1.1.7 DO NOT pull or carry the appliance by the power cable.

1.1.8 DO NOT pull the plug from the socket by the cable.

1.1.9 DO NOT use worn or damaged cables, plugs or connectors.

Immediately have any faulty item repaired or replaced by a qualified

electrician. When a BS 1363/A UK 3 pin plug is damaged, cut the

cable just above the plug and dispose of the plug safely.

Fit a new plug according to the following instructions (UK only).

a) Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’.

b) Connect the BROWN live wire to the live terminal ‘L’.

c) Connect the BLUE neutral wire to the neutral terminal ‘N’.

d) After wiring, check that there are no bare wires, that all wires have been correctly

connected, that the cable outer insulation extends beyond the cable restraint and that the restraint is

tight. Double insulated products, which are always marked with this symbol , are fitted with live

(brown) and neutral (blue) wires only. To rewire, connect the wires as indicated above - DO NOT

connect either wire to the earth terminal.

1.1.10 Products which require more than 5 amps are supplied without a plug. In this case you must contact a

qualified electrician to ensure that a suitably rated supply is available. We recommend that you discuss

the installation of an industrial round pin plug and socket with your electrician.

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL

REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE

PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL

INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

INSTRUCTIONS FOR

VARIABLE SPEED BELT

SANDER 400W/230V

MODEL No: SBS35

Original Language Version

SBS35 Issue:3(SP)-

09/12/13

RECOMMENDED FUSE

RATING: 5A

1 2 3 4 5

Summary of Contents

Page 1 - SANDER 400W/230V

1.1 ELECTRICAL SAFETY WARNING! It is the responsibility of the owner and the operator to read, understand and comply with the following:You must ch

LEAD PAINT WARNING! Paint once contained lead as a traditional ingredient. The dust from the removal of such paint is toxic if ingested/inhaled and mu

Page 3 - 3. PREPARING FOR USE

3.1 Attach one of the three assorted arms (fig.1), do this by taking the spring provided and placing it into the circular recess on the grinders f

Page 4 - 4. OPERATING INSTRUCTIONS

5. MAINTENANCE WARNING!Disconnect sander from mains power supply before changing accessories, servicing or performing maintenance.Replace or re

Page 5

WARNING! – Risk of Hand Arm Vibration Injury.This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately.This tool is subject

Comments to this Manuals

No comments

Sealey SBS35 User Manual

Browse online or download User Manual for Power tools Sealey SBS35. Sealey SBS35 User Manual

Summary of Contents

Comments to this Manuals