Sealey RS20024 User Manual
Browse online or download User Manual for Power suppliers Sealey RS20024. Sealey RS20024 User Manual
- Page / 6
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
INSTRUCTIONS FOR:
ROADSTART EMERGENCY POWER PACKS
MODEL No's: RS20024, 21203 & 21224
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: BEFORE USING THIS PRODUCT, PLEASE READ THE INSTRUCTIONS CAREFULLY. MAKE CAREFUL NOTE OF SAFETY INSTRUCTIONS, WARNINGS
AND CAUTIONS. THIS PRODUCT SHOULD ONLY BE USED FOR ITS INTENDED PURPOSE. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE DAMAGE
AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. RETAIN THESE INSTRUCTIONS FOR FUTURE USE.
IMPORTANT: To reduce the risk of a battery explosion, follow these instructions and those published by the battery manufacturer and the
manufacturer of any equipment you intend to use in the vicinity of the battery. Remember to review warning marks on all products and on
engines.
1.1. PERSONAL PRECAUTIONS
Ensure there is another person within hearing range, or close enough to come to your aid should a problem arise, when working near
a lead-acid battery.
Have fresh water and soap nearby in case battery acid contacts skin, clothing or eyes.
Wear safety eye protection and protective clothing. Avoid touching eyes while working with a battery.
Wash immediately with soap and water if battery acid contacts skin or clothing. If acid enters eye, flush eye immediately with cool, clean
running water for at least 15 minutes and seek immediate medical attention.
Remove personal metallic items such as rings, bracelets, necklaces and watches. A lead-acid battery can produce a short-circuit current
high enough to weld a ring or the like to metal, which may cause severe burns.
1.2. IMPORTANT SAFETY INSTRUCTIONS
Familiarise yourself with the applications, limitations and potential hazards of the RoadStart.
Keep the unit in good working order and condition. Replace damaged parts immediately.
Use only recommended parts. To use unapproved parts may be dangerous and will invalidate your warranty.
The RoadStart must only be opened and checked by qualified service personnel. DO NOT disassemble the unit for any reason.
Keep children and unauthorised persons away from the work area.
This RoadStart is not intended for use by persons (including children) with reduced physiclal, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person
responsible for their safety.
Keep work area clean and tidy and free from unrelated materials. Ensure that there is adequate lighting.
If the RoadStart receives a sharp knock or blow, it must be checked by a qualified service agent before being used.
When not in use re-charge every 30 days or sooner.
DO NOT touch positive and negative clamps together as this could cause an explosion.
DO NOT smoke or allow a spark, or flame in the vicinity of the battery or engine.
DO NOT drop any metal item onto the battery as it may spark or short circuit the battery, which could cause an explosion.
DO NOT use RoadStart to recharge dry cell batteries that are commonly used with home appliances. These batteries may explode and
cause personal injury and damage to property.
DO NOT charge or boost a frozen battery.
DO NOT use attachments other than those recommended. To do so may cause damage to the unit and other equipment and possible
personal injury.
DO NOT pull or carry the unit by its cables and do not pull the negative and positive clamps from the battery terminals.
DO NOT operate in vicinity of flammable liquids or gases.
DO NOT recharge the unit with plugs, cables or attachments that are damaged. Replace such items immediately.
DO NOT use this RoadStart to perform a task for which it is not designed.
DO NOT store the unit in damp or wet locations or where the temperature may exceed 50°C.
DO NOT submerge the unit in water.
DO NOT use whilst under the influence of drugs, alcohol or intoxicating medication.
1. SAFETY INSTRUCTIONS
WARNING! RISK OF EXPLOSIVE GASES. Working in the vicinity of a lead acid battery is dangerous because it can
generate explosive gases. It is important to remember that batteries generate explosive gases during normal operation.
WARNING! This equipment contains a sealed, non-spillable lead acid battery. This must be disposed of in accordance with
local regulations.
IMPORTANT WARRANTY INFORMATION: KEEP YOUR ROADSTART HEALTHY
Read and understand the general safety and operating instructions before use. The following information is intended to help you
keep the product in top working order.
NOTE – The battery in this unit is a consumable item and its ability to accept charge will reduce over time. We will warrant it
against mechanical and electrical defect for a period of one year - this does not cover fair wear and tear.
If the battery is not properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances we will
not replace the battery even if it is less than one year old.
You can help prolong the life cycle of the battery by following a few simple guidelines.
• Plug in your new RoadStart to the mains transformer and make an INITIAL charge lasting 72 hours.
• Ensure the unit is fully charged before storage.
• DO NOT leave the RoadStart for longer than 30 days without putting it on charge.
• DO NOT drop or handle the RoadStart roughly – this will break or disconnect the battery terminals rendering the battery useless and the
warranty void.
• DO NOT use any other charger, other than the one supplied, to recharge the RoadStart battery.
• Units are fitted with ventilation slots to aid heat dissipation and to allow any gases generated by the RoadStart to escape.
• DO NOT allow water to enter the unit as this could cause damage and will invalidate the warranty.
Original Language Version
RS20024, 21203 & 21224 Issue: 1 - 24/01/13
© Jack Sealey Ltd
Summary of Contents
Page 1 - INSTRUCTIONS FOR:
INSTRUCTIONS FOR: ROADSTART EMERGENCY POWER PACKSMODEL No's: RS20024, 21203 & 21224Thank you for purchasing a Sealey product. Manufactured to
Page 2 - RS21224
DO NOT leave the unit in a totally discharged state for an extended period of time as this may result in permanent damage to the battery. DO NOT
Page 3 - 3. CHARGING INSTRUCTIONS
3. CHARGING INSTRUCTIONSWARNING! YOU MUST FOLLOW SAFETY INSTRUCTIONS IMPORTANT Charge RoadStart for 72 hours immediately after purchase, after eac
Page 4 - 5. MAINTENANCE
4. OPERATION 5. MAINTENANCE5.1 Charger Maintenance Instructions5.1.1. Unplug the charger from the RoadStart before attempting any maintenan
Page 5
Problem Possible Cause Solution CHECK BATTERY (red) LED on charger Charger is not making a good connection Check the connection. Make s
Page 6 - Battery Removal
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prio
Related products and manuals for Power suppliers Sealey RS20024
Power suppliers Sealey SPP01 User Manual
(1 pages)
(1 pages)
Power suppliers Sealey S0547 User Manual
(2 pages)
(2 pages)
Power suppliers Sealey S0549 User Manual
(2 pages)
(2 pages)
Power suppliers Sealey S0550 User Manual
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 0.849 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals