Sealey THC100 User Manual download pdf

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.

USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE

DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

1.1. General Safety

 Familiarise yourself with the applications and limitations of the local environment measuring meter.

 Keep the meter clean and in good condition.

 Protect the meter from the following:

Electro-magnetic fields from engine components, arc welders and induction heaters closer than 125mm.

Static electricity.

Thermal shock caused by large and/or rapid ambient temperature change.

High temperatures.

 DO NOT get the meter wet or use in damp or wet locations or areas where there is condensation.

 DO NOT use the meter in areas where there is steam, dust or smoke. These conditons may result in erroneous readings.

 DO NOT use the meter for any purpose other than that for which it is designed.

2. INTRODUCTION/SPECIFICATION

2.1. Introduction

Large LCD digital screen displays both the internal and external temperature readings simultaneously. Also shows humidity and time. Features

integral stand or can be wall mounted. Ideal for the workshop, body shop, office or home. Temperature can be shown in either °C or °F.

Original Language Version

INSTRUCTIONS FOR:

THERMOMETER/HYGROMETER/CLOCK

INSIDE/OUTSIDE

MODEL No: THC100

Model No:.......................................................................................... THC100

Outside Temperature Probe Cable Length:.................................................3m

Size:..........................................................................104mm x 98mm x 22mm

Inside/Outside Temperature Range:.............-50°C to +70°C (-58°F to 158°F)

Temperature Accuracy:.........................................................................+/- 1°C

Relative Humidity Range:........................................................10% to 99%RH

Power:..................................................................1.5V battery (AAA supplied)

TCH100 Issue: 1 - 21/03/13

3. MAIN FUNCTIONS

3.1 LCD display of time, indoor temperature, outdoor temperature and relative humidity at a glance.

3.2 Alarm displayed when set.

3.3 12/24 hour format, °C/°F temperature units.

3.4 Temperature and relative humidtiy trend display.

3.5 Wall (keyhole slot) or desk mounting (stand).

3.6 Spare battery housing for continuity and convenience.

4. SPECIFICATIONS

5. BUTTON FUNCTIONS

5.1 Initialdisplaystatus(g.1)

5.1.1 Remove battery cover at rear by sliding in the direction of arrow with your thumb.

5.1.2 Fit supplied AAA battery into lower battery compartment observing correct polarity. A beep sound indicates presence of battery.

5.1.3 Thetimeisdisplayedas12.00AMona12hourformat,thetemperatureandrelativehumidity%gurewillalsobedisplayed.

5.1.4 Replace the battery compartment cover by sliding along "tram lines" until it snaps into place.

5.1.5 Press the button marked "C/F" to display temperature in eitherCentigradeor Fahrenheit.

5.2 Settingthetime

5.2.1 Pressthe"MODE"buttononceandholdfor2secondsuntilyouhearabeepandtheminutesash.Pressthe"SET"buttonrepeatedly

to obtain the correct time in minutes past the hour.

5.2.2 Pressthe"MODE"buttononceandthehourashes.Pressthe"SET"buttonrepeatedlytoobtainthecorrecthour.

5.2.3 Press the "SET" button to obtain 12hour or 24hour (ie if AM or PM displayed 12hour, no display 24hour applies)

5.3 Settingthealarmtime(assuming the time is now set as in section 5.2)

5.3.1 Press the "MODE" button and the time ":" LCDwillstopashing.

5.3.2 Pressthe"SET"buttontwoorthreetimesandthebellsymbolwillbedisplayed(g.2).

5.3.3 Withthebellsymboldisplayedpressthe"MODE"buttonandholdfor2seconds.Theminuteswillash.Pressthe"SET"button

repeatedly to obtain the correct time in minutes past the hour.

5.3.4 Pressthe"MODE"buttononceandthehourashes.Pressthe"SET"buttonrepeatedlytoobtainthecorrecthour.

5.3.5 Pressthe"MODE"buttononcetoconrm.

5.3.6 When the alarm sounds press any button to cease.

5.4 Rearfacebuttonfunctions(g.3)

5.4.1 Press "CLEAR" button to clear memory of minimum and maximum temperature and humidity values.

5.4.2 Press "MAX/MIN" button to display memory of minimum and maximum temperature and humidity values of previous period.

5.4.3 Shrouded centre button "C/F" does not function on this model, its function is covered on the front face, again marked "C/F". See

instruction 5.1.5.

MODE

C/F

SET

fig.1

1 2

Summary of Contents

Page 1 - MODEL No: THC100

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly mai

Page 2 - 6. CLEANING

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prio

Comments to this Manuals

No comments

Sealey THC100 User Manual

Browse online or download User Manual for Measuring instruments Sealey THC100. Sealey THC100 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Measuring instruments Sealey THC100