Sealey TP9424 User Manual download pdf

 WARNING! Pump must be used in accordance with Health & Safety, government, local authority, and water authority rules

and regulations.

 Familiarise yourself with application and limitations, as well as the potential hazards peculiar to the pump.

 WARNING!Disconnect the pump from the battery before changing accessories, servicing or performing any maintenance.

 Maintain the pump in good condition. Keep the pump clean.

 Replace or repair damaged parts (use an authorised service agent). Use genuine parts only. Non authorised parts may be

dangerous and will invalidate the warranty.

 If the bottom of the liquid container is covered with sludge, sand, gravel or mud etc, suspend the pump or place it on a raised

base to operate above the solid matter. Sand and such substances will reduce working life of pump, and invalidate your

warranty.

 In flood situations, user is responsible for ensuring that appropriate back up procedures, alarms etc are correctly installed in

case of pump failure.

 In swimming pool, fish ponds, etc, ensure location is clear of people and animals (including removal of fish from pond).

Note: this pump is not designed for continuous use in a fish pond or similar water feature or display.

 DO NOT use with petrol or other volatile liquids within flashpoint range -20°C to +80°C.

 DO NOT use to pump septic tanks or settling pits.

 DO NOT operate the pump if any parts are damaged or missing as this may cause failure and/or personal injury.

 DO NOT use the pump for any purpose other than for which it is designed.

 DO NOT operate pump out of liquid. The pump pick up area must be completely submerged during operation.

 DO NOT operate the pump during freezing temperatures. DO NOT leave the pump in water that may freeze.

 DO NOT carry the pump by its electrical cable, or outlet pipe.

 When not in use remove battery clips from terminals. Rinse pump, drain out any liquid and store in a frost free, safe location.

 WARNING! Whilst the pump may be used in dirty water, it is not to be used for water containing large particles e.g. mud, weed

etc.

 WARNING! DO NOT allow uncontrolled discharge of contaminated water/harmful chemicals thus polluting the environment.

 WARNING! This pump must only be connected to a 24Vdc battery. DO NOT attempt to connect to any other supply.

INSTRUCTIONS FOR:

SUBMERSIBLE TRANSFER PUMP 24V

MODEL No: TP9424

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these

instructions and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL

REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE

PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY

AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

2. INTRODUCTION & SPECIFICATIONS

Robust and compact portable pump for use with diesel, non-aggressive chemicals and fresh or dirty water.

Suitable for re-fuelling/fluid transfer of plant, agricultural and marine equipment on site. The pump is supplied with a 3mtr outlet

hose and stainless steel nozzle plus a 4mtr battery cable with clips. Will fit through a Ø54mm aperture to allow emptying of

containers. End cap can be unscrewed for periodic cleaning of the filter.

Flow rate at hose end:......... 15 ltr/min

Voltage:................................ 24Vdc

Current:................................ 3.5amp

Pressure: ............................. 15psi/1bar

Diameter: ............................. 53.5mm

Length:................................. 145mm

Weight: ................................ 0.4 kg

Duty Cycle: .......................... 15mins

3. CONTENTS

Unpack the product and check the contents.

Ensure that there is no damage. If any problem is

noted, contact your supplier immediately.

A ........ 3 metre outlet hose + stainless steel nozzle

B ........ Motor

C ........ Impeller guard

D ........ Filter

E ........ End cap

F ........ Battery clips

G ........ 4 metre battery cable

H ........ Seal cap

Original Language Version

TP9424 Issue: 1 - 22/02/10

1 2

Summary of Contents

Page 1 - MODEL No: TP9424

 WARNING! Pump must be used in accordance with Health & Safety, government, local authority, and water authority rules and regulations. Fami

Page 2 - 5. MAINTENANCE

4. OPERATING INSTRUCTIONS5. MAINTENANCE  WARNING! Not for use with Petrol or volatile liquids within flash point range -20OC to +80OC  WARNING

Comments to this Manuals

No comments

Sealey TP9424 User Manual

Browse online or download User Manual for Hardware Sealey TP9424. Sealey TP9424 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Sealey TP9424