Sealey BS104 User Manual download pdf

INSTRUCTIONS FOR:

WORKSHOP CYCLE STAND

MODEL NO: BS104

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions

give complete satisfaction.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,

WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.

FAILURE TO DO SO MAY CAUSE DAMAGE OR SERIOUS PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.

PLEASE KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

 Maintain the stand in good condition, replace or repair damaged parts. Use recommended parts only. Non authorised parts may be

dangerous and will invalidate the warranty.

 Before use ensure that all stand nuts and bolts are tight and that moveable and clamping parts are in good working order.

 Place stand on a sound level surface offering adequate working clearance for its function. Keep area clean, tidy and free from unrelated

materials. Ensure there is adequate lighting.

 Removeillttingclothing.Removeties,watches,rings,andotherloosejewellery,andcontainlonghair.

 Maintain correct balance and footing. Ensure the floor is not slippery and wear non slip shoes.

 Keep children, pets and unauthorised persons away from the working area.

7 DO NOT use the stand for for any purpose other than for which it is designed.

7 DO NOT get the stand wet or use in damp or wet locations or areas where there is condensation. 

 When not in use store the stand in a safe, dry, child proof area.

 DO NOT exceed maximum load of 30kg.

1. SAFETY INSTRUCTIONS

2. INTRODUCTION

Durablesteelconstructionandidealforhomeandworkshopuse.Fittedwithtwoplasticjawsthatlocateunderthecrankandframewithplastic

coated hook to hold in position. Features large rubber feet for added stability and tool tray to ensure tools are always close to hand. Folds flat for

easeofstorage.Adjustablecyclelockingstraptopreventwheelmovementisavailableseparately-orderModelNo.BS102S,

(see fig.4).

3. SPECIFICATION

4. ASSEMBLY / OPERATION

Model No: ........................................................................................ BS104

Working Height: .............................................................................. 940mm

Weight ............................................................................................... 6.5kg

4.1 Unpack the contents, should there be any damaged or missing contact your supplier.

4.1.1. Laybaseonitssideontheoortoassemble.OpenitoutandremovenutsandwashersonlyfromscrewsJ,KandL,(seeg.2).

4.1.2. TemporarilyremovethetopportionofbarA,(seeg.2).Thisisthepartwiththetooltraybracketonit.

4.1.3. FitholdingbarC,thispivotsonscrewJ.

4.1.4. ReplacethetopportionofbarA,andtightenthethreescrews,J,KandL.

4.1.5. Fitthetwostandtubes,B(seeg.1).

4.1.6. Carefullyliftthebikestandontoitsfeet.

4.1.7. AttachthefourplasticfeetontotheendofthestandtubesB,(seeg.1).

4.1.8. AttachthebikeclampE,(seeg.3)throughtheholeintheholdingbar(C).

Push the spring from below onto the clamp and hold on with wing screw N,

 (seeg.3).

4.1.9. Attachthetoolstoragetray.

4.1.10.Checkallscrewsandnutsforstabilityandre-tightenthemifnecessary.

4.1.11.Liftbicycleontothestandmakingsurethebike’sbottombracketsecurely

locates into the lower stand bracket, and the down tube locates into the

upper one.

4.1.12.Securebikeonstandusingthebikeclamp,byliftingitoverthedowntube

 andtighteningusingthewingscrewN,(seeg.3).

4.1.13.Usethetwolevers,(seeg.5).toholdthefrontwheelpointingforward,

 alternativelyuseBS102S,(seeg.4).

BS104 Issue:1-19/02/13

Original Language Version

Fig.1

1 2

Summary of Contents

Page 1 - WORKSHOP CYCLE STAND

INSTRUCTIONS FOR:WORKSHOP CYCLE STANDMODEL NO: BS104Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if u

Page 2 - 01284 703534

01284 75750001284 [email protected] UK Distributor, Sealey Group, Kempson Way, Suffolk Business Park, Bury St. Edmunds, Suffolk,IP327ARwww

Comments to this Manuals

No comments

Sealey BS104 User Manual

Browse online or download User Manual for For bicycles Sealey BS104. Sealey BS104 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For bicycles Sealey BS104