Sealey APPC07 User Manual download pdf (Page 1)

INSTRUCTIONS FOR:

PIT CART 7-DRAWER HEAVY DUTY

MODEL No: APPC07

1.1. GENERAL SAFETY

 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using these units.

 Locate the units in a suitable work area.

 Keep the work area clean, uncluttered and ensure there is adequate lighting.

 WARNING! Use the Rollcab on level and solid ground, preferably concrete.

 Keep the units clean and tidy in accordance with good workshop practice.

 Keep children and unauthorised persons away from the work area.

 DO NOT use these units for any purpose other than that for which they are designed.

 DO NOT place the units in a damp or wet location or an area where there is condensation.

 DO NOT clean the units with any solvents which may damage the surfaces or the protective coating.

 DO NOT move the units with the drawers out. To avoid tipping, open one drawer at a time and close and secure all drawers whilst

moving.

 DO NOT step on the drawers.

Multi purpose heavy duty pit cart ideal for use in workshops, garages, job sites, race pits and more where tools and equipment are required

away from base. Oversized dimensions make for ultimate ruggedness with 435 x 180mm pneumatic tyres, hydraulic disc braking/parking system

and handle bar steering. Two large side lockers with 5 position adjustable shelf but equally suited to accomodating a compressor, welder,

Roadstart or other larger items. Seven Heavy Duty ball bearing slide drawers, designed to accomodate our modular tool trays. A stainless steel

worktop completes the ruggedness. All drawers and both side lockers can be locked with the turn of a single key (supplied with two identical

keys).

Original Language Version

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE

PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

1. SAFETY

2. INTRODUCTION

3. SPECIFICATION

Model No: ............................ APPC07

Overall Size (W x D x H): ...... 1850 x 774 x 1224mm

Medium Drawer Size: (x4):........ 533 x 398 x 60mm

Large Drawer Size (x2): . . . . . . . . . 533 x 398 x 130mm

Xtra-Large Drawer (x1): ......... 533 x 398 x 205mm

Locker Size (x2):............... 380 x 580 x 605mm

Weight: ................................. 250kg

4. ASSEMBLY

APPC07 Issue: 1 - 11/08/14

4.1. Fit handle assembly to front of cart with four bolts and spring washers. (See g.1).

4.2. Use clips along length of handle shaft to attach hydraulic brake pipe. Ensure that it is not stretched when handle is moved up and down.

1 2

Summary of Contents

Page 1 - PIT CART 7-DRAWER HEAVY DUTY

INSTRUCTIONS FOR:PIT CART 7-DRAWER HEAVY DUTYMODEL No: APPC071.1. GENERAL SAFETY WARNING! Ensure Health & Safety, local authority, and general

Page 2 - 5. OPERATION

Fig.3 APPC07 Issue: 1 - 11/08/14 Environmental Protection. Recycle unwanted materials instead of disposing of them as waste. All tools, acces

Comments to this Manuals

No comments

Sealey APPC07 User Manual Page 1

Browse online or download User Manual for Equipment Sealey APPC07. Sealey APPC07 User Manual

Summary of Contents

Comments to this Manuals

Sealey APPC07 User Manual Page 1

Browse online or download User Manual for Equipment Sealey APPC07. Sealey APPC07 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Sealey APPC07