Sealey AP200 User Manual download pdf

  WARNING! DO NOT extend the table beyond the extension

warning line located on the table pole.

5.1. To adjust the height of the workstation firstly support the table

top to prevent it from dropping, then turn the adjusting screw

(7) anticlockwise to loosen it.

5.2. When positioning the table next to or over painted or 'valuable'

surfaces ensure they are covered by protective non-scratch

covers.

Model No: ..........................................AP200

Minimum height: ......................................890mm

Maximum height: .....................................1190mm

Table size (W & D): ...................................730 x 505mm

Capacity:............................................25kg

 WARNING! Use workstation on level and solid ground, preferably concrete.

 Locate workstation in a suitable working area.

 Keep the work area clean, uncluttered and ensure there is adequate lighting.

 Keep the workstation clean and tidy in accordance with good workshop practice.

 Keep children and unauthorised persons away from working area.

 Ensure that fixings have been securely tightened before use.

 DO NOT use the workstation for any purpose other than that for which it is designed.

 DO NOT stand on the frame or attempt to ride on it.

 DO NOT attempt to transport heavy loads on the workstation.

 WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this workstation.

INSTRUCTIONS FOR:

MOBILE WORKSTATION - ADJUSTABLE

HEIGHT

MODEL NO: AP200.V2

1. SAFETY

2. INTRODUCTION

3. SPECIFICATION

4. ASSEMBLY

5. OPERATION

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE

PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

Table is fully adjustable in height. Features four-section table, one large for main workpiece and three equal sized smaller sections for

accessories. Rubber lining on the table helps prevent damage to the unit and workpiece. Suitable for use in workshops and warehouses.

Supplied with four castor wheels.

 Refertog.1.

4.1. Bolt front wheel frame (10) to joining frame (9). Bolt rear wheel

frame (12) to joining frame (9).

4.2. Bolt table top base assembly (8) to joining frame (9).

4.3. Screw wheels into the bottom of both wheel frames (10) and

(12).

4.4. Bolt table top mounting frame (6) to table top (3) using spring

washer (5) and table top mounting bolt (4). Note: table top

 (3)andtabletopmountingframe(6)willonlyttogetherone 

way.

4.5. Insert the table top mounting frame (6) into table top base

assembly (8) so that the table top is centred directly over the

 longestwidthofthewheels,seeg.2.

4.6. Screw in table top adjusting screw (7).

g.1

g.2

AP200.V2 Issue No.1 24/10/14

Original Language Version

1 2

Summary of Contents

Page 1 - AP200.V2

  WARNING! DO NOT extend the table beyond the extension warning line located on the table pole.5.1. To adjust the height of the workstation fir

Page 2 - 01284 703534

AP200.V2 Issue No.1 24/10/14NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specificatio

Comments to this Manuals

No comments

Sealey AP200 User Manual

Browse online or download User Manual for Equipment Sealey AP200. Sealey AP200 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Sealey AP200